Skip to content
Need help identifying a part? Contact parts support
SKU: 1859336Brand: Non-Specified Brand
,

1-1/4 inch Copper 45 Degree Press Elbow Copper x Copper

$6.51

1-1/4” Copper 45° Press Elbow – Lead-Free Press Fitting for Directional Changes The 1-1/4” copper 45-degree press elbow is engineered for use in press-connect copper tubing systems where a moderate directional change is required.

Quantity
SKU: 1859336 Categories: ,

1-1/4” Copper 45° Press Elbow – Lead-Free Press Fitting for Directional Changes

The 1-1/4” copper 45-degree press elbow is engineered for use in press-connect copper tubing systems where a moderate directional change is required. It allows for smooth transitions in hot and cold water distribution, hydronic heating, and other mechanical piping systems without the need for soldering or flame.

Manufactured from lead-free wrought copper, this fitting features press ends compatible with standard press tools and jaws. The integrated sealing element forms a permanent, mechanical joint when compressed, providing consistent, leak-resistant performance in above-ground piping systems.

Product Specifications

  • MaterialLead-free wrought copper (ASTM B75/B88)
  • Nominal Size1-1/4 inch
  • Angle45 degrees
  • Connection TypePress x Press
  • Seal ElementEPDM (standard for potable water applications)
  • Pressure RatingUp to 200 PSI (temperature-dependent)
  • CertificationsNSF/ANSI 61 & 372, ICC-ES PMG, CUPC listed

Key Features

  • ✅Press-Fit Design– Reduces installation time by eliminating soldering and open flame work
  • ✅Lead-Free Compliance– Meets U.S. Safe Drinking Water Act requirements for potable water systems
  • ✅Corrosion-Resistant Copper– Provides durability in closed-loop and open water systems
  • ✅Clean Transition Geometry– 45° bend ensures directional change without excessive flow resistance
  • ✅Consistent Seal Integrity– Compression seal activated by press tools ensures uniform leak resistance

Installation Guidelines

Use only approved press tools with compatible jaws for proper installation. Ensure pipe ends are deburred, clean, and inserted to the proper depth before pressing. Follow manufacturer instructions regarding system flushing and pressure testing. Not suitable for underground or concealed use without additional protection as per local code.

Typical Applications

This fitting is commonly used in branch line offsets, risers, and return loops in potable water systems, HVAC loop piping, and radiant floor heating systems. It is suitable for both new installations and retrofit work in commercial and residential mechanical rooms.

Material Note

Wrought copper press fittings provide long-term structural integrity, fire-safe assembly, and are compatible with Type L and Type M copper tubing. The EPDM sealing element supports use in hot and cold potable water systems up to 200°F (93°C), depending on pressure requirements.

The 1-1/4” copper 45-degree press elbow is a code-compliant solution for angular transitions in copper piping systems requiring reduced installation time, consistent sealing, and lead-free construction.

Specifications

Specifications Weight 0.300000 Brand Non-Specified Brand ADA Compliance No Angle 45 Deg Application Potable Water, Hydronic Heating (with Glycol), Chilled Water, Compressed Air (200 psi Max), Non-Medical Gases (140 psi Max), Low Pressure Steam (15 psi Max), Vacuum (24.5 in Mercury Max at 68 deg F) Length (inches) 3.05 Width (inches) 4.45 Height (inches) 2.05 End Style Copper x Copper Side A 1-1/4″ Side B 1-1/4″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN PF 03050 Material Copper Product Family Fittings Warranty 50 Years Limited Item Returns This item can be returned

Buying Information

Confirm the 1-1/4 inch configuration, copper material, angle and copper x copper ends before ordering.

Brand

Non-Specified Brand

MPN

PF 03050

0
Scroll to Top