Skip to content
Need help identifying a part? Contact parts support
SKU: 5484Brand: Non-Specified Brand
,

1-1/4 inch x 1-1/4 inch x 1/2 inch Copper Reducing Tee Copper x Copper x Copper

$8.74

1-1/4 inch x 1-1/4 inch x 1/2 inch Copper Reducing Tee – Sweat Connection for Potable Water Systems The 1-1/4 inch Copper Reducing Tee is a wrot copper fitting designed for joining three copper tube sections of varying diameters.

Quantity
SKU: 5484 Categories: ,

1-1/4 inch x 1-1/4 inch x 1/2 inch Copper Reducing Tee – Sweat Connection for Potable Water Systems

The1-1/4 inch Copper Reducing Teeis a wrot copper fitting designed for joining three copper tube sections of varying diameters. It features two 1-1/4 inch outlets and one 1/2 inch reducing branch, all with sweat (solder) connections, suitable for Type L and M copper tubing. Manufactured to ANSI/ASME B16.22 standards, this tee is commonly used in pressure-rated potable water systems and mechanical piping applications.

Made from lead-free alloy per ASTM B75 and compliant with NSF/ANSI 61 and 372 certifications, this fitting supports use in drinking water distribution and other systems requiring compliance with federal and local low-lead regulations. Its smooth bore design minimizes flow resistance, promoting efficient system operation.

Performance and Dimensional Specifications

  • ✅MaterialWrot copper (C12200)
  • ✅Main Run Size1-1/4 inch x 1-1/4 inch
  • ✅Branch Size1/2 inch
  • ✅Connection TypeSweat (solder cup)
  • ✅Standard ComplianceANSI/ASME B16.22, ASTM B75, NSF/ANSI 61 & 372
  • ✅Operating PressureUp to 200 PSI (depending on tubing type and application)

Application Scope

This reducing tee is suitable for installations requiring branch lines off larger copper distribution piping. Typical use cases include

  • ✅ Residential and commercial domestic water systems
  • ✅ Hydronic heating systems
  • ✅ Chilled water or HVAC loop installations
  • ✅ Transition points to appliances, branch valves, or manifolds

Installation Considerations

All connections are designed for soldering with standard lead-free plumbing-grade solders. Surfaces must be cleaned and fluxed prior to assembly. Ensure proper heating for full solder penetration and bond strength. Use of a heat shield is recommended when working near flammable or finished surfaces.

Design Advantages

  • ✅Compact Form FactorIdeal for concealed spaces such as wall cavities and floor joists
  • ✅Dezincification-ResistantMaterial is not susceptible to zinc leaching, preserving integrity over time
  • ✅Consistent Wall ThicknessManufactured for balanced heat transfer during soldering
  • ✅Low Pressure DropSmooth interior helps maintain system efficiency and reduces turbulence

Regulatory Note

Meets U.S. Safe Drinking Water Act requirements for lead-free plumbing products. Confirm use in accordance with applicable plumbing code jurisdictions.

The1-1/4 inch x 1-1/4 inch x 1/2 inch Copper Reducing Teeoffers reliable performance for pressure-rated copper systems, enabling clean transitions with reduced flow interruption. Its precise dimensions and code compliance make it an ideal choice for professional-grade installations in potable water or mechanical piping networks.

Specifications

Specifications Weight 0.310000 Brand Non-Specified Brand ADA Compliance No Length (inches) 1.4 Width (inches) 2 Height (inches) 2.8 End Style Copper x Copper x Copper Side A 1-1/4″ Side B 1-1/4″ Side C 1/2″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN W 04071 Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed configuration and specifications for MPN W 04071 before ordering.

Brand

Non-Specified Brand

MPN

W 04071

0
Scroll to Top