1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee – FNPT Threaded Fitting for Pipe Branching
The 1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee is a malleable iron fitting designed for pipe branching in threaded piping systems. This tee features three female NPT connections and allows for a smooth reduction from a 1-1/4 inch run to a 3/4 inch branch, making it suitable for general utility, air, water, gas, or low-pressure steam lines.
Manufactured to conform with ANSI/ASME B16.3 standards and hot-dip galvanized per ASTM A153, this fitting provides resistance to corrosion and long-term durability. It is used in both commercial and residential systems where galvanized iron piping is specified and a size transition is required at a branch junction.
Performance Features
- Cast Malleable Iron BodyProvides excellent mechanical strength and impact resistance for structural reliability in high-demand environments.
- Hot-Dip Galvanized CoatingEnhances corrosion resistance, especially in environments with moisture or outdoor exposure.
- National Pipe Thread (NPT)Standard tapered threads for secure, pressure-rated connections with pipe sealant or Teflon tape.
- Pressure RatingSuitable for up to 300 PSI non-shock for air, oil, or water; and 150 PSI for saturated steam service.
Specifications
- MaterialASTM A197 malleable iron
- FinishZinc-coated via hot-dip galvanization
- End ConnectionsFNPT x FNPT x FNPT
- Dimensions1-1/4” run, 3/4” branch
- StandardsASME B16.3; coating per ASTM A153
Typical Applications
Used to connect and reduce branch pipe size in
- Potable and non-potable water distribution systems
- Low-pressure steam or condensate lines
- Compressed air systems
- Natural gas or LP piping (where approved)
Installation Guidance
Use pipe thread compound or PTFE tape on male threads. Tighten with hand torque initially, then complete with a wrench while supporting the fitting to prevent deformation. Avoid overtightening to preserve thread integrity and fitting structure.
Note
This fitting is intended for use in non-corrosive or moderately corrosive applications and is not recommended for underground installation unless protected against soil contact and corrosion.
The 1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee is a pressure-rated solution designed for consistent mechanical performance in multi-branch systems. Its corrosion resistance, dimensional accuracy, and code compliance make it a reliable component for any threaded piping assembly.




