Skip to content
Need help identifying a part? Contact parts support
Sale!
SKU: 7846Brand: Non-Specified Brand
,

1-1/4 inch x 3/4 inch x 1-1/4 inch Black Iron Reducing Tee Female x Female x Female

Original price was: $8.13.Current price is: $2.03.

Black Malleable Iron Reducing Tee – Threaded Class 150 Fitting The Black Iron Reducing Tee is a Class 150 malleable iron fitting designed to connect three pipe sections of varying diameters at 90-degree intersections.

Quantity
SKU: 7846 Categories: ,

Black Malleable Iron Reducing Tee – Threaded Class 150 Fitting

TheBlack Iron Reducing Teeis a Class 150 malleable iron fitting designed to connect three pipe sections of varying diameters at 90-degree intersections. With a reducing outlet, this tee enables smooth transitions in line size within gas, oil, steam, or air systems. It features female National Pipe Taper (NPT) threads on all three ends and is manufactured to ANSI/ASME B16.3 and ASTM A197 standards.

This tee is constructed from black annealed malleable iron for enhanced ductility and impact resistance. The black finish offers minimal corrosion protection and is intended for use in low-moisture environments. Commonly found in fuel gas distribution, HVAC, compressed air, and general industrial piping systems, it is suitable for above-ground applications where a pressure-tight seal is required.

Specifications

  • ✅MaterialMalleable cast iron (ASTM A197)
  • ✅Connection TypeFemale NPT x Female NPT x Female NPT
  • ✅Pressure Rating150 PSI for steam/air, 300 PSI for water/oil (non-shock)
  • ✅FinishBlack (non-galvanized)
  • ✅Standard ComplianceANSI/ASME B16.3, ANSI B1.20.1
  • ✅TypeReducing tee – center outlet smaller than run connections

Applications

This reducing tee is used to connect dissimilar pipe sizes in piping systems that require mechanical strength, dimensional consistency, and leak resistance. Typical uses include

  • ✅ Natural gas and propane systems
  • ✅ Steam and return loops (non-potable)
  • ✅ HVAC air handling lines
  • ✅ Compressed air and lubricant delivery piping
  • ✅ Industrial oil distribution

Installation Requirements

Install using properly sized pipe wrenches and appropriate thread sealing compound or PTFE tape compatible with the system media. Threads must be free of contaminants and fully engaged to create a pressure-tight seal. Care should be taken not to over-tighten, which may damage threads or fittings. This fitting is intended for use in threaded systems only and is not suitable for welding.

Key Advantages

  • ✅Code-Compliant DesignConforms to recognized mechanical and plumbing code requirements
  • ✅Robust Mechanical PropertiesIdeal for high-vibration or mechanically active environments
  • ✅Thread IntegrityTapered NPT threading supports leak-resistant engagement with standard piping
  • ✅Reduced FootprintCompact fitting ideal for tight mechanical spaces

Regulatory Note

This fitting is approved for use in non-potable systems and complies with most U.S. mechanical code requirements for black malleable fittings. Always verify with the authority having jurisdiction (AHJ) before installation.

TheBlack Iron Reducing Teeis a durable, industry-standard component for professionals working in gas, steam, and mechanical piping environments. Its reliable threaded design and pressure rating make it well-suited for critical systems requiring dimensional accuracy and long-term performance.

Specifications

Specifications Weight 1.030000 Brand Non-Specified Brand ADA Compliance No Length (inches) 2.1 Width (inches) 2.85 Height (inches) 3.45 End Style Female x Female x Female Side A 1-1/4″ Side B 3/4″ Side C 1-1/4″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN 520-646 Material Black Iron Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

520-646

0
Scroll to Top