1/2″ Carbon Steel 45° Press Elbow – Press-Connect Fitting for Fuel Gas Applications
The 1/2″ carbon steel 45-degree press elbow is a mechanically pressed fitting designed for directional transitions in rigid piping systems. Manufactured for fuel gas service, it is constructed from ASTM-compliant carbon steel and features M-profile press ends with pre-installed HNBR sealing elements rated for gas system compatibility. The 45° configuration supports compact routing in installations requiring directional offsets while maintaining consistent flow and system integrity.
Technical Specifications
- Nominal Size1/2 inch
- MaterialCarbon steel, typically ASTM A420 or equivalent
- Connection TypePress-to-connect ends, M-profile
- Seal MaterialHNBR (hydrogenated nitrile butadiene rubber), factory-installed
- Angle45 degrees
- Operating PressureUp to 200 psi (dependent on system configuration)
- Temperature Range40°F to 180°F for natural gas and propane systems
- CertificationsComplies with ANSI LC 4 / CSA 6.32 for fuel gas press fittings; ICC-ES listed, IAPMO certified
Installation Guidelines
This press fitting is designed for use with carbon steel pipe conforming to ASTM A53, A106, or A135. Use only manufacturer-approved press tools with M-profile jaws. Ensure pipe ends are cut square, deburred, and marked for insertion depth. Press connections must be tested in accordance with local codes and system requirements prior to commissioning.
Common Applications
Typical applications include
- Fuel gas distribution systems (natural gas and LPG)
- Low-temperature hydronic heating circuits
- Mechanical piping installations requiring reduced bend angles
- Gas appliance branch piping in commercial and residential systems
Material Consideration
Carbon steel press fittings with HNBR seals are intended for use in dry gas systems and are not rated for potable water or chemical exposure. In corrosive or moisture-prone environments, external coating or additional protection may be required per system specification.
Specifications
Buying Information
Confirm the listed pipe sizes and connection configuration match the system before ordering.




