Skip to content
Need help identifying a part? Contact parts support
SKU: 1950781Brand: Non-Specified Brand
,

1/2 inch Copper 90 Degree Elbow Copper x Male

$4.65

1/2 Inch Copper 90-Degree Elbow – C x C Solder Joint for Directional Pipe Transitions The 1/2 inch Copper 90-Degree Elbow is a solder joint fitting designed to facilitate 90-degree directional changes in copper tubing systems.

Quantity
SKU: 1950781 Categories: ,

1/2 Inch Copper 90-Degree Elbow – C x C Solder Joint for Directional Pipe Transitions

The1/2 inch Copper 90-Degree Elbowis a solder joint fitting designed to facilitate 90-degree directional changes in copper tubing systems. Commonly used in potable water supply, HVAC systems, and hydronic piping networks, this elbow supports clean transitions around framing obstructions or within confined mechanical spaces.

Manufactured from lead-free wrought copper, this elbow conforms to applicable plumbing codes and standards for use in domestic water systems. Its compact radius and sweat (copper x copper) connections allow for precise routing of 1/2 inch nominal copper tubing.

Performance Characteristics

  • ✅Wrought Copper Construction– Offers high corrosion resistance and mechanical integrity under pressure and temperature fluctuations.
  • ✅Copper x Copper Ends– Designed for soldered (sweat) connections per ASME B16.22 and ASTM B88 pipe standards.
  • ✅Lead-Free Certified– Compliant with NSF/ANSI 61 and NSF 372 for potable water applications under the Reduction of Lead in Drinking Water Act.

Installation Notes

Proper surface preparation is required prior to soldering. Deburr tubing ends and clean with emery cloth or brush. Use approved lead-free solder and flux suitable for potable water. Heat fitting evenly to ensure full solder penetration around the joint. Allow to cool naturally before pressurization.

Application Scope

This 90-degree elbow is typically installed in residential and commercial plumbing systems where directional routing of water supply lines is needed. Suitable for hot and cold water distribution, recirculating systems, and low-pressure HVAC configurations. Also commonly used in new builds, retrofits, and confined chase runs.

Regulatory Compliance

All copper fittings used in potable systems must meet lead-free criteria outlined by the U.S. Safe Drinking Water Act. This elbow meets those standards and is approved for use in all jurisdictions where NSF 61 and 372 certification is required.

Technical Specifications

  • MaterialLead-Free Wrought Copper
  • Nominal Size1/2 inch
  • End ConnectionsC x C (Sweat/Solder)
  • StandardsASME B16.22; NSF/ANSI 61 & 372; ASTM B75/B88

Features

  • ✅Compact Radius– Optimized for use in tight spaces and structured wall cavities.
  • ✅Corrosion Resistance– Suitable for use in aggressive water environments and closed-loop systems.
  • ✅Mechanical Durability– Withstands standard working pressures and thermal cycling without fatigue or deformation.

The 1/2 inch Copper 90-Degree Elbow provides a reliable and code-compliant solution for directional pipe routing in copper piping systems. It is a standard component in plumbing layouts requiring precise alignment and long-term durability.

Specifications

Specifications Weight 0.120000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Length (inches) 0.75 Width (inches) 1.35 Height (inches) 1.5 End Style Copper x Male Side A 1/2″ Side B 1/2″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN A 01506NL Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the 1/2 inch configuration, copper material, angle and copper x male ends before ordering.

Brand

Non-Specified Brand

MPN

A 01506NL

0
Scroll to Top