Skip to content
Need help identifying a part? Contact parts support
SKU: 6084Brand: Non-Specified BrandAvailability: Out of Stock
,

1/4 inch x 5 inch Brass Nipple

$2.16

1/4″ x 5″ Brass Pipe Nipple – Precision-Threaded for Secure, Corrosion-Resistant Connections The 1/4″ x 5″ Brass Nipple is a straight, close-tolerance fitting designed for joining two female-threaded components in plumbing, mechanical, or compressed air systems.

Out of stock

1/4″ x 5″ Brass Pipe Nipple – Precision-Threaded for Secure, Corrosion-Resistant Connections

The1/4″ x 5″ Brass Nippleis a straight, close-tolerance fitting designed for joining two female-threaded components in plumbing, mechanical, or compressed air systems. Manufactured from lead-free brass, this component is suitable for potable water lines and is also commonly used in non-potable fluid or gas systems requiring durability and resistance to corrosion.

This fitting offers high tensile strength and a strong resistance to dezincification, making it suitable for both indoor and outdoor use, including corrosive environments. Its threaded design allows for straightforward assembly using NPT (National Pipe Thread) tapered threads, which are standard for U.S. pipe connections.

Key Specifications

  • MaterialLead-free brass (in compliance with NSF/ANSI 61 & 372)
  • SizeNominal 1/4 inch diameter, 5 inches overall length
  • Thread TypeMale NPT, both ends
  • Temperature Range65°F to 250°F (-54°C to 121°C)
  • Pressure RatingSuitable for up to 1,200 PSI (non-shock water, air, oil)

Installation Guidelines

For proper installation, apply thread sealant tape or pipe joint compound to all male threads before assembly. Avoid overtightening, especially when threading into brass or softer metal components. Brass is less prone to thread galling compared to stainless steel, but care should still be taken to avoid cross-threading or thread deformation.

Common Applications

  • Potable water systems
  • Compressed air lines
  • Low-pressure steam and gas service
  • Hydronic heating loops
  • Instrumentation and control circuits

Advantages of Lead-Free Brass Construction

  • Corrosion ResistanceMaintains mechanical integrity and thread quality over time in wet environments.
  • ComplianceMeets federal and state mandates for lead-free components in potable water systems.
  • MachinabilityBrass allows for precise threading and repeatable engagement without excessive tool wear.

Code Note

Lead-free brass nipples are now required by federal law for any component in contact with potable water systems per the Reduction of Lead in Drinking Water Act (2014), and meet NSF/ANSI 61 and 372 standards.

The1/4″ x 5″ Brass Pipe Nippleis an ideal solution for tight-space connections and linear system extensions in professional installations. It offers the mechanical reliability and compliance necessary for both new construction and retrofit applications.

Specifications

Specifications Weight 0.110000 Brand Non-Specified Brand ADA Compliance No Length (inches) 1.88 Width (inches) 1.88 Height (inches) 1.88 Side A 1/4″ Side B 5″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN NBR015 Material Brass Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and connection details for MPN NBR015 before ordering.

Brand

Non-Specified Brand

MPN

NBR015

0
Scroll to Top