Skip to content
Need help identifying a part? Contact parts support
SKU: 1859366Brand: Non-Specified Brand
,

1 inch Copper Cap

$5.23

1 Inch Copper Cap – Lead-Free Sweat Fitting for Copper Tube Systems The 1 inch Copper Cap is a solder (sweat) fitting designed to seal the end of a 1 inch nominal copper tube in closed water supply, hydronic heating, or mechanical piping systems.

Quantity
SKU: 1859366 Categories: ,

1 Inch Copper Cap – Lead-Free Sweat Fitting for Copper Tube Systems

The 1 inch Copper Cap is a solder (sweat) fitting designed to seal the end of a 1 inch nominal copper tube in closed water supply, hydronic heating, or mechanical piping systems. Manufactured from lead-free wrought copper, this cap is engineered to meet stringent code requirements and deliver reliable performance in both residential and commercial applications.

Product Advantages and Applications

  • ✅Lead-Free Copper AlloyCompliant with ANSI/NSF 61 and NSF 372, ensuring safe use in potable water systems per U.S. Safe Drinking Water Act requirements.
  • ✅Formed for Sweat ConnectionDesigned to be installed with soldering methods on Type M, L, or K copper tube using ASTM B813 flux and ASTM B32 solder alloy.
  • ✅Durability in Sealed SystemsWithstands continuous working pressures up to 200 psi and service temperatures up to 400°F (when properly soldered).
  • ✅Consistent FitManufactured under ASME B16.22 specifications to ensure dimensional uniformity and reliable sealing.

Recommended Installation Practices

This cap should be installed using standard copper tube joining techniques. Ensure tube ends are clean, reamed, and deburred before flux and solder application. Apply uniform heat and allow solder to flow evenly around the joint for full capillary action. Avoid excessive solder buildup. Use caution when capping pressurized or hot lines—system should be depressurized and drained prior to installation.

Technical Specifications

  • Nominal Size1 inch
  • Connection TypeCopper Tube (CTS) sweat fit
  • MaterialWrought copper (lead-free)
  • StandardASME B16.22
  • Pressure Rating200 psi (non-shock, water/oil)
  • Temperature RangeUp to 400°F
  • CertificationsNSF/ANSI 61 & 372; complies with lead-free plumbing laws

Common Applications

The 1 inch copper cap is typically used to terminate open copper lines in potable water distribution, radiant heating, chilled water loops, or when isolating lines for future expansion. It is also used in pressure testing segments before fixture installation.

Note

This fitting is intended for use with soldered copper tubing only. Not for use with PEX, CPVC, or mechanical press systems unless explicitly rated.

For sealed-end terminations in code-compliant systems, the 1 inch Copper Cap provides the reliability, compatibility, and longevity that professional contractors demand. Incorporate it into your piping design with confidence in performance and code adherence.

Specifications

Specifications Weight 0.138000 Brand Non-Specified Brand ADA Compliance No Application Potable Water, Hydronic Heating (with Glycol), Chilled Water, Compressed Air (200 psi Max), Non-Medical Gases (140 psi Max), Low Pressure Steam (15 psi Max), Vacuum (24.5 in Mercury Max at 68 deg F) Length (inches) 1.88 Width (inches) 1.88 Height (inches) 1.88 Side A 1″ Fitting Type Caps Item Type Fittings Manufacturer Non Specified Manufacturer MPN PF 07011 Material Copper Product Family Fittings Warranty 50 Years Limited Item Returns This item can be returned

Buying Information

Confirm the listed pipe cap configuration and MPN PF 07011 before ordering.

Brand

Non-Specified Brand

MPN

PF 07011

0
Scroll to Top