1 Inch x 1/2 Inch Copper Reducing Coupling – Wrot Copper Fitting for Soldered Pipe Transitions
The 1 inch x 1/2 inch copper reducing coupling is a solder joint fitting used to connect copper tubing of two different diameters in potable water and hydronic systems. Designed for use with soldered copper tube connections, it ensures a permanent, code-compliant transition between line sizes in both new construction and retrofit piping layouts.
Material and Dimensional Standards
This fitting is manufactured from lead-free wrought copper conforming to ASTM B75 and is compatible with Type K, L, and M copper tube. It features socket (cup) connections on both ends sized to accept 1 inch and 1/2 inch nominal copper tubing. The fitting is intended for use in pressure piping systems carrying potable water, HVAC fluids, and other compatible media under applicable design conditions.
- ✅MaterialLead-free copper alloy (NSF/ANSI 61 and 372 compliant)
- ✅Connection TypeCopper tube (cup) x copper tube (cup) – solder joint
- ✅ComplianceASME B16.22 and MSS SP-104
- ✅Pressure RatingUp to 200 psi (when properly soldered and tested)
- ✅Temperature Range0°F to 250°F (water service with lead-free solder)
Applications
Used in potable water distribution, hot water recirculation, and closed-loop hydronic heating systems, this reducing coupling allows for the reduction of pipe size within a single run. It is typically installed in branch connections, fixture rough-ins, and riser transitions where flow demand or space constraints require a change in pipe diameter.
Installation Practices
To ensure a code-compliant joint, tube ends must be reamed, cleaned, and fluxed prior to assembly. The use of lead-free solder is mandatory for potable water systems. After soldering, all joints must be pressure-tested per local code requirements. This fitting is not intended for use with press-connect systems or compression fittings.
Code Note
Federal legislation and all major U.S. plumbing codes mandate the use of lead-free copper fittings in potable water systems. This reducing coupling complies with those requirements, making it suitable for use in all jurisdictions.
Summary of Key Features
- ✅Lead-Free Wrot Copper Construction– Safe for potable water applications
- ✅ASME B16.22 Compliant– Conforms to dimensional and performance standards
- ✅Compact, One-Piece Design– Enables efficient transitions between line sizes
The 1 inch x 1/2 inch Copper Reducing Coupling is a precision-manufactured fitting engineered for soldered copper systems where a durable, leak-resistant reduction in line size is required. It supports long-term performance in pressurized plumbing and mechanical systems.




