1 Inch x 1 Inch x 1/2 Inch Carbon Steel Gas Press Reducing Tee – Press x Press x Press
The Carbon Steel Gas Press Reducing Tee provides a secure and code-compliant connection point for branching 1/2 inch gas lines from a 1 inch main. This reducing tee is specifically designed for use in fuel gas distribution systems using carbon steel piping and press technology. The fitting supports press-to-connect installation, eliminating the need for welding or threading in above-ground gas applications.
Performance and Construction
- ✅MaterialZinc-plated carbon steel for corrosion resistance in exposed indoor gas installations
- ✅Press ConnectionThree press ends designed to fit carbon steel pipe and seal via mechanically compressed HNBR sealing elements
- ✅Sealing ElementFactory-installed yellow HNBR O-rings formulated for fuel gas compatibility
- ✅Connection SizesMain line: 1 inch; Branch: 1/2 inch
- ✅Operating PressureRated for up to 125 psi in fuel gas systems (verify per project and code requirements)
Standards and Certifications
- ✅ComplianceConforms to ANSI LC 4 / CSA 6.32 for fuel gas press fittings
- ✅UsageApproved for use in natural gas and propane distribution (above-ground only)
- ✅Operating Temperature Range40°F to 180°F under normal service conditions
Installation Guidelines
This fitting is installed using an approved press tool compatible with the press fitting profile. Ensure all pipe ends are properly cut, deburred, cleaned, and marked to verify full insertion depth before pressing. The fitting should only be used in systems where thermal expansion, pressure, and media are within the product’s performance limits.
This reducing tee is not intended for use in underground systems unless properly protected and approved for burial. Do not substitute for potable water or compressed air unless rated and certified for such use.
Typical Applications
- Branch line connections in natural gas risers and headers
- Fuel gas distribution for appliances and mechanical equipment
- Residential and commercial pipe routing for LPG and NG systems
Material and System Compatibility
Carbon steel press fittings are chosen for their mechanical strength, ease of installation, and performance under pressurized gas conditions. The integrated HNBR seal provides reliable gas-tight performance without flame or soldering, simplifying system expansion and retrofits.
Specifications
Buying Information
Confirm model PWR7481727 and the listed connection or size details before ordering.




