1 Inch Bronze Pack Joint Union – Threaded Connection for Copper Service Lines
The 1 inch Bronze Pack Joint Union provides a reliable, mechanical connection between copper tubing and threaded system components. Designed for use in water service applications, this union allows for disassembly and reassembly of piping without disturbing the tubing. The pack joint configuration accommodates minor misalignment and thermal expansion while maintaining a watertight seal.
Material and Performance Standards
Manufactured from lead-free bronze in compliance with ANSI and NSF requirements, this union is engineered for compatibility with CTS (Copper Tube Size) pipe. The component supports repeated use and is suitable for both above-ground and below-grade installations where access or maintenance is required.
- ✅MaterialLead-free bronze, compliant with NSF/ANSI 61 and 372
- ✅Nominal Size1 inch CTS inlet x 1 inch FNPT outlet
- ✅Pressure RatingTypically up to 175 PSI, depending on system design
- ✅Temperature RangeOperating range up to 180°F for water service
Application and Use
This fitting is used to join copper tubing to threaded distribution piping in potable water systems. It is commonly installed at meter settings, curb stops, or service entrances. The union design facilitates field service and component replacement without cutting the main line.
Installation Guidelines
The pack joint end uses a compression-style gasket or insert sleeve to form a mechanical seal around CTS copper. The threaded end connects to standard FNPT female threads. Pipe ends must be clean and properly aligned prior to assembly. Apply appropriate thread sealant or PTFE tape to the threaded joint. Do not overtighten to avoid damage to sealing components.
- ✅Tool RequirementsStandard pipe wrenches for assembly; no flame required
- ✅Field MaintenanceCan be disassembled and reinstalled without removing tubing
- ✅Alignment TolerancePack joint design permits minor flexibility in tubing orientation
Certifications and Compliance
- Lead-Free CertificationMeets requirements of the U.S. Safe Drinking Water Act
- NSF CertificationCertified to NSF/ANSI 61 and NSF/ANSI 372 for potable water use
- UPC ListingComplies with Uniform Plumbing Code installation guidelines
For service line applications requiring a dependable union between copper tubing and threaded connections, the 1 inch Bronze Pack Joint Union offers mechanical strength, reusability, and code compliance. Designed for utility-grade and municipal water systems, this fitting ensures a long-lasting, corrosion-resistant joint under standard operating conditions.
Specifications
Buying Information
Confirm the listed size, connection, or rating details for MPN 302-355NL before ordering.




