Details
Model10258
ManufacturerIPS Weld-On
Product NameWeld-On 790 Multi-Purpose Cement
Part Number21691 / 11037
Container Size1 Pint (16 fl oz) Can
DescriptionMedium-bodied, fast-setting, low-VOC solvent cement for PVC and CPVC piping systems up to 6 inches in diameter, suitable for pressure and non-pressure applications.
Product Overview
Weld-On 790 is a medium-bodied, multi-purpose solvent cement formulated for joining PVC and CPVC pipe and fittings across all classes and schedules through 6 inches in diameter (Schedule 80 up to 4 inches). Engineered for professional-grade performance, the compound delivers high bond strength, rapid set time, and dependable sealing characteristics for systems requiring interference-fit solvent welding. Its low-VOC formulation ensures compliance with air quality regulations while maintaining fast handling properties. This cement is intended for use in pressure and non-pressure piping systems where code-approved multi-purpose products are permitted.
Technical Specifications
- Manufacturer Part Number10258
- Alternate Part Numbers21691 / 11037
- Product TypeMulti-Purpose Solvent Cement
- Compatible MaterialsPVC and CPVC pipe and fittings
- Body TypeMedium-bodied
- ViscosityMedium, syrupy liquid
- ColorClear
- Container Size1 Pint (16 fl oz) metal can with brush applicator
- Base ChemistryKetone-based solvent blend
- Chemical CompositionTetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone
- Specific Gravity0.934 ± 0.02
- VOC Content<490 g/L (Low-VOC compliant)
- Flash Point4°F (-20°C), closed cup
- Set TimeFast setting; cure time dependent on pipe size, temperature, and humidity
- Pipe/Fitting Size RangeAll classes/schedules through 6″ (160 mm); Schedule 80 through 4″ (110 mm)
- Joint TypeSolvent-welded, interference fit
- Pressure RatingSuitable for pressure and non-pressure systems
- Primer RequirementPrimer required for pressure-rated applications; may be omitted on non-pressure systems if approved by local code
- Operating Temperature RangeUp to 140°F (60°C)
- ComplianceASTM D2564 (PVC), ASTM F493 (CPVC), SCAQMD Rule 1168/316A, NSF/ANSI 61 Certified for potable water
- Shipping ClassificationORM-D, Consumer Commodity
Installation Notes
- Ensure pipe and fitting surfaces are clean, dry, and free of oil, grease, or debris before application.
- Apply primer where required by applicable code or when assembling pressure-rated systems.
- Apply a uniform coat of Weld-On 790 to both the pipe and fitting socket using the included brush applicator.
- Assemble components immediately with a quarter-turn motion to ensure complete solvent distribution.
- Hold the joint in position for several seconds to prevent push-out; allow sufficient cure time before pressurization.
- Do not test or operate the system until full cure time has elapsed as specified by manufacturer curing tables.
Summary
The IPS Weld-On 790 Multi-Purpose Cement (1 Pint) is a clear, medium-bodied, fast-setting solvent cement engineered for joining PVC and CPVC piping systems. Formulated for high-strength bonding and low-VOC compliance, it provides professional-grade performance in both pressure and non-pressure applications up to 6 inches in diameter when installed per ASTM and local code standards.




