Details
Model10257
ManufacturerIPS Weld-On
Product NameWeld-On 790 Multi-Purpose Cement
Part Numbers11036 / 21692
Container Size1 Quart (32 fl oz) Can
DescriptionMedium-bodied, fast-setting, low-VOC solvent cement formulated for joining PVC and CPVC pipe and fittings through 6 inches in diameter. Suitable for both pressure and non-pressure piping applications.
Product Overview
Weld-On 790 Multi-Purpose Cement is a professional-grade solvent adhesive engineered for the installation of PVC and CPVC piping systems in plumbing, industrial, and mechanical applications. This medium-bodied, low-VOC compound delivers a strong, permanent bond with fast set and cure times, allowing for efficient assembly of piping systems up to 6 inches in diameter (Schedule 80 through 4 inches). The ketone-based formulation provides consistent solvent penetration and adhesion under standard field conditions. Weld-On 790 is approved for use on both pressure and non-pressure systems when installed in compliance with applicable codes and standards.
Technical Specifications
- Manufacturer Part Number10257
- Alternate Part Numbers11036 / 21692
- Product TypeMulti-Purpose Solvent Cement
- Compatible MaterialsPVC and CPVC pipe and fittings
- Body TypeMedium-bodied
- ColorClear
- ViscositySyrupy liquid consistency
- Container Size1 Quart (32 fl oz) metal can with brush applicator
- Base ChemistryKetone-based solvent blend
- Chemical CompositionTetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone
- Specific Gravity0.934 ± 0.02
- VOC Content<490 g/L (Low-VOC formulation)
- Flash Point4°F (-20°C), closed cup
- Set TimeFast setting; varies by pipe size, temperature, and humidity
- Pipe/Fitting RangeAll classes/schedules up to 6 in. (160 mm) diameter; Schedule 80 through 4 in. (110 mm)
- Joint TypeSolvent-welded, interference-fit connection
- Pressure RatingSuitable for pressure and non-pressure systems per ASTM and code requirements
- Primer RequirementRequired for pressure-rated systems; optional for non-pressure systems where permitted by local code
- Maximum Operating Temperature140°F (60°C)
- ComplianceASTM D2564 (PVC), ASTM F493 (CPVC), NSF/ANSI 61 (potable water), SCAQMD Rule 1168/316A (Low VOC)
- Shipping ClassificationORM-D, Consumer Commodity
- Use ApplicationsPressure piping, water distribution, chemical processing, and drain/waste/vent systems
Installation Notes
- Inspect and clean pipe and fitting surfaces to remove dirt, oil, and moisture before assembly.
- Apply primer where required by code or for pressure-rated piping systems.
- Use the included brush applicator to apply an even, full coat of cement to both pipe and fitting socket.
- Assemble immediately with a quarter-turn twist to ensure uniform solvent distribution and bonding.
- Hold joint in position for several seconds to prevent separation; remove excess cement.
- Allow appropriate set and cure times before pressure testing in accordance with Weld-On cure time charts.
- Do not dilute or thin cement; store in original, tightly sealed container away from ignition sources.
Summary
The IPS Weld-On 790 Multi-Purpose Cement (1 Quart) is a clear, medium-bodied, fast-setting solvent adhesive formulated for use with PVC and CPVC piping systems. Designed for high-strength joint integrity and low-VOC compliance, it supports both pressure and non-pressure applications up to 6 inches in diameter and conforms to ASTM, NSF, and local plumbing standards for professional installations.




