Honeywell V8043E1020 Zone Valve – 1″ Sweat, Two-Way On/Off Low Voltage Actuator
The Honeywell V8043E1020 is a two-way, straight-through zone valve with low voltage on/off control, intended for use in hydronic heating systems. With a compact form factor and 1″ sweat connections, this valve is suitable for residential and light commercial zoning applications where individual zone isolation is required.
Design and Application
- Valve FunctionNormally closed, opens fully with 24V power and returns to closed position on power loss
- PowerheadReplaceable without breaking into the system or draining lines
- End SwitchIntegral end switch rated for 50 VA @ 24V AC for controlling secondary equipment (e.g., circulator or burner)
- System UseSuitable for closed-loop hydronic heating systems
Key Features
- Manual LeverAllows manual override for system filling or emergency operation
- Straight-Through Flow PatternDesigned for efficient water flow with minimal pressure drop
- 18″ Lead WiresPre-stripped conductors for quick electrical connections
- Powerhead ReplacementField-serviceable without disconnecting piping or draining the system
- Fast ActuationTypical full stroke operation time of 15 seconds
Technical Specifications
- Model NumberV8043E1020/U
- Pipe Size1″ sweat connection
- Voltage24 VAC, 50/60 Hz
- Max Fluid Temp240°F (116°C)
- Max Close-Off Pressure20 PSI
- Operating Ambient Temp125°F (52°C) maximum
- Control CompatibilityWorks with standard 24V thermostats and zone control panels
Installation Guidelines
This valve should be installed in the return line of a closed-loop hydronic system. It is designed for horizontal mounting but may be mounted vertically if precautions are taken to protect the actuator from condensate and dripping. Electrical connection requires a low-voltage transformer and thermostat. Follow NEC and local codes.
Notes for Contractors
- Field-serviceable actuator minimizes labor time for replacements
- Includes end switch for burner or pump control integration
- Reliable motor-driven mechanism with spring return ensures consistent operation
- Common choice for zoning applications using standard Honeywell controls and thermostats
Performance Summary
- ActuationMotor open, spring close
- Control Signal24V AC from low-voltage thermostat or relay
- Cycle Rate15 seconds nominal
- End Switch FunctionCloses circuit when valve is fully open
Specifications
Buying Information
Verify the model, connection, dimensions, and application details against the source listing before ordering.




