Harris 15620F1 Stay-Silv® 15 Brazing Alloy – 15% Silver Phos-Copper Rods for HVAC and Refrigeration
The Harris 15620F1 Stay-Silv® 15 brazing alloy is a silver-bearing phosphorus-copper filler metal used for joining copper and copper alloys, commonly specified in air conditioning, refrigeration, and general HVAC installations. The alloy contains 15% silver and 5% phosphorus, offering improved ductility and a wider brazing clearance range than lower silver content alloys.
This alloy is suitable for copper-to-copper joints without external flux and can also be used on copper-to-brass applications with an appropriate flux. Its broad melting range (1190°F to 1475°F) and strong capillary action allow for effective bonding in varying joint tolerances.
Product Features
- Alloy DesignationBCuP-5
- Silver Content15%
- Phosphorus Content5%
- Melting RangeSolidus 1190°F (643°C), Liquidus 1475°F (802°C)
- Recommended Brazing Temperature1325°F–1500°F (720°C–815°C)
- Flux RequirementSelf-fluxing on copper; flux required for brass or other alloys
- PackagingStick tube
- ComplianceEU REACH and RoHS compliant
Application Notes
Stay-Silv® 15 is intended for use by professionals familiar with torch brazing processes. Apply appropriate joint spacing for capillary action, clean all surfaces thoroughly, and heat uniformly. Use flux only when joining copper to non-copper alloys. Avoid use on ferrous metals due to lack of wetting action.
Use Case Suitability
Commonly used in commercial and residential HVAC and refrigeration systems where high mechanical strength and moderate clearance fit-up are required. Not recommended for electrical applications or structural components under mechanical stress without evaluation.
Specifications
Buying Information
Confirm the listed Harris Product Group 15620F1 identifier and configuration match your application before ordering.




