Skip to content
Need help identifying a part? Contact parts support
SKU: 5883Brand: Non-Specified Brand
,

2-1/2 inch x 4-1/2 inch Black Steel Nipple

$3.46

2-1/2″ x 4-1/2″ Black Steel Nipple – Threaded Pipe Segment for Pressure Piping Systems The 2-1/2″ x 4-1/2″ black steel nipple is a straight threaded fitting fabricated from Schedule 40 carbon steel pipe.

Quantity

2-1/2″ x 4-1/2″ Black Steel Nipple – Threaded Pipe Segment for Pressure Piping Systems

The 2-1/2″ x 4-1/2″ black steel nipple is a straight threaded fitting fabricated from Schedule 40 carbon steel pipe. It is designed for use in non-potable systems including natural gas, low-pressure steam, air distribution, and hydronic heating. The male NPT threads at both ends allow direct connection between female-threaded pipe components in commercial and industrial piping networks.

Product Specifications

  • Nominal Size2-1/2 inch NPT
  • Length4-1/2 inches overall
  • MaterialCarbon steel, black finish (uncoated)
  • Wall ThicknessSchedule 40
  • Thread TypeANSI/ASME B1.20.1 NPT, both ends (male x male)
  • Manufacturing StandardASTM A733 (pipe nipples), pipe per ASTM A53 Grade A or B
  • Pressure RatingUp to 150 psi (dependent on system specifications and media)

Installation Guidance

Ensure threads are clean and properly aligned before installation. Use PTFE thread sealant or pipe joint compound rated for the intended system media. Tighten fittings using a correctly sized pipe wrench while avoiding excessive torque, which may damage threads or distort the fitting.

Application Overview

This black steel nipple is typically used in

  • Fuel gas and propane piping systems
  • Steam and hydronic heating circuits
  • Compressed air lines and mechanical utility piping
  • Fire protection systems (where approved)

Material Considerations

Black steel pipe is intended for use in systems where corrosion resistance from internal or external water exposure is not a primary requirement. It is not suitable for potable water supply. For buried or wet applications, appropriate coatings or alternative materials should be specified to meet corrosion control requirements.

Specifications

Specifications Weight 1.680000 Brand Non-Specified Brand ADA Compliance No Length (inches) 4.5 Width (inches) 2.5 Height (inches) 2.5 Side A 2-1/2″ Side B 4-1/2″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 589-045 Material Black Steel Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

589-045

0
Scroll to Top