Skip to content
Need help identifying a part? Contact parts support
SKU: 2010789Brand: Lukjan
,

2-1/4″ x 10″ x 6″ Register Boot, Center End

$2.31

Lukjan Center End Register Boot — Series P17C, 6″ Ø, 10″ Length, 2-1/4″ Width Air register boot used in HVAC ductwork to transition from a round duct to a register opening. The “center end” design directs airflow from a duct that terminates at the end and delivers air centrally in…

Quantity
SKU: 2010789 Categories: ,

Lukjan Center End Register Boot — Series P17C, 6″ Ø, 10″ Length, 2-1/4″ Width

Air register boot used in HVAC ductwork to transition from a round duct to a register opening. The “center end” design directs airflow from a duct that terminates at the end and delivers air centrally into a grille/register. This Series P17C model is sized for 6-inch round duct and a narrow throat width.

  • Series / modelP17C(Lukjan Center End Register Boot)
  • Part / model referenceRB102106(typical for 6″ × 10″ × 2¼″ variant):contentReference[oaicite:0]{index=0}
  • Nominal duct connection diameter6 inches (Ø 6″ round)contentReference[oaicite:1]{index=1}
  • Boot length (depth)10 inchescontentReference[oaicite:2]{index=2}
  • Throat width (narrow side opening width)2-1/4 inches (2.25″)contentReference[oaicite:3]{index=3}
  • Material: Galvanized steel, 30 gauge thickness:contentReference[oaicite:4]{index=4}
  • Finish: Hot-dip galvanized (for corrosion resistance):contentReference[oaicite:5]{index=5}
  • Weight (approx): 0.5 lb (each):contentReference[oaicite:6]{index=6}
  • Mounting / orientation: Center-end boot, meaning air enters from the round duct at the central end and discharges through the long throat opening to the side / face register
  • Typical applications
    • Residential or light commercial HVAC supply runs where a small boot is needed for a register grille.
    • Situations where the duct ends flush with a wall or floor and must deliver air into a narrow register opening.
  • Compatibility notes
    • Ensure the register grille (faceplate) opening matches or exceeds the throat width (2.25″) and length.
    • Verify that the duct system’s airflow and static pressure are within acceptable limits for small-throat boots to avoid noise or restriction.
    • Use proper sealing (foil tape or duct mastic) along seams and connections to prevent leakage.

Technical & Performance Notes

  • The narrow throat width (2.25″) is relatively small; make sure velocity and pressure drop are acceptable for your HVAC design.
  • The 30 gauge galvanized steel gives moderate rigidity and durability for indoor duct environments.
  • Proper alignment and secure fastening to the round duct (usually via sheet-metal screws or seam method) is crucial to avoid vibration or air leakage.
  • All seams should be sealed to maintain system efficiency and prevent air leakage.
  • When selecting a face grille / register to pair with this boot, choose one with compatible dimensions and sufficient free area to minimize resistance.
  • Because the boot is relatively shallow (10″), it can fit in tighter spaces but care must be taken not to kink or obstruct airflow in tight bends.

Specifications

Specifications Weight 0.500000 Length (inches) 14 Width (inches) 2.25 Height (inches) 6 Item Type Register Boots Brand Lukjan Manufacturer Lukjan Metal Products MPN RB102106 Sub Type Register Boot Diameter 6 in End Direction Straight Material Galvanized Steel Material Thickness 30 ga Overall Width 2.25 in Item Returns This item can be returned

Buying Information

Confirm RB102106 and the stated dimensions for the existing duct application before ordering

Brand

Lukjan

MPN

RB102106

0
Scroll to Top