Skip to content
Need help identifying a part? Contact parts support
SKU: 5118Brand: Non-Specified Brand
,

2 inch Copper Reducing Adapter Copper x Female

$15.24

2 inch x 1-1/2 inch Copper Reducing Adapter – Solder Joint Transition Fitting The 2 inch x 1-1/2 inch Copper Reducing Adapter is designed to facilitate a direct reduction between two copper tube sizes in potable water, hydronic heating, or similar piping systems.

Quantity

2 inch x 1-1/2 inch Copper Reducing Adapter – Solder Joint Transition Fitting

The 2 inch x 1-1/2 inch Copper Reducing Adapter is designed to facilitate a direct reduction between two copper tube sizes in potable water, hydronic heating, or similar piping systems. Fabricated from lead-free wrought copper alloy, this fitting offers a secure solder-joint connection between a 2-inch nominal pipe and a 1-1/2 inch female-end termination.

Its construction complies with ANSI/ASME B16.22 and ASTM B75 standards, ensuring dimensional consistency and corrosion resistance in code-compliant plumbing systems. This adapter is suitable for use in Type L and Type M copper tubing applications where compact, permanent reductions are required.

Product Performance Attributes

  • ✅Material CompositionLead-free copper alloy for potable water system compatibility.
  • ✅Connection Type2 inch copper tube x 1-1/2 inch female fitting – solder connection at both ends.
  • ✅Operating TemperatureSuitable for use in systems with sustained temperatures up to 400°F (204°C) when installed with lead-free solder alloys.
  • ✅Pressure RatingUp to 200 PSI in water distribution systems, dependent on solder alloy and installation quality.
  • ✅ComplianceConforms to NSF/ANSI 61 and NSF/ANSI 372 for lead-free plumbing components.

Installation Guidance

Installers must follow accepted soldering practices, including thorough cleaning of mating surfaces, application of lead-free flux, and appropriate heating to ensure full capillary action within the joint. Proper support of the piping system is required during and after installation to maintain alignment and joint integrity. This component is intended for use by trained personnel familiar with copper joining methods.

Application Scope

Commonly used in municipal water distribution systems, hydronic heating circuits, and recirculating domestic hot water applications, the 2 inch x 1-1/2 inch copper reducing adapter enables precise pipe size transitions without additional couplings. It is particularly valuable in retrofit scenarios where legacy piping diameters must be reduced for system modifications.

Technical Insight

Copper’s non-reactive nature and antimicrobial properties make it the material of choice for pressurized domestic water systems. This reducing adapter preserves system flow rates while allowing for downstream piping reconfiguration in confined or existing installations.

Specification Summary

  • MaterialWrought copper alloy (lead-free, ASTM B75/B88 compliant)
  • Size2 inch x 1-1/2 inch
  • Connection TypeSolder x Solder
  • CertificationsNSF/ANSI 61, NSF/ANSI 372; meets ASME B16.22

Specifications

Specifications Weight 0.570000 Brand Non-Specified Brand ADA Compliance No Length (inches) 1.8 Width (inches) 2.78 Height (inches) 2.78 End Style Copper x Female Side A 2″ Side B 2″ Fitting Type Adapters Item Type Fittings Manufacturer Non Specified Manufacturer MPN W 01287 Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Match W 01287 to the existing component before ordering

Brand

Non-Specified Brand

MPN

W 01287

0
Scroll to Top