Skip to content
Need help identifying a part? Contact parts support
SKU: 6988Brand: Non-Specified Brand
,

2 inch PVC Schedule 40 90 Degree Elbow Plastic x Plastic

$0.70

2 inch PVC Schedule 40 90° Elbow – Slip x Slip for Gravity Flow Applications The 2 inch Schedule 40 PVC 90-Degree Elbow is a solvent-welded fitting designed for directional changes in non-pressurized plumbing systems.

Quantity
SKU: 6988 Categories: ,

2 inch PVC Schedule 40 90° Elbow – Slip x Slip for Gravity Flow Applications

The 2 inch Schedule 40 PVC 90-Degree Elbow is a solvent-welded fitting designed for directional changes in non-pressurized plumbing systems. Manufactured to ASTM D2466 and D1784 standards, this fitting provides reliable performance in drain, waste, and vent (DWV) systems, as well as in irrigation and certain industrial applications.

Molded from high-quality Type 1 Grade 1 PVC compound, this elbow features slip-style hubs on both ends, allowing for solvent welding to matching Schedule 40 pipe. It supports consistent system alignment and smooth internal transitions to maintain flow characteristics around bends.

Product Benefits for Jobsite Efficiency

  • ✅Schedule 40 RatedSuitable for non-pressure and low-pressure systems up to 140°F (60°C).
  • ✅Slip Hub ConnectionsEngineered for solvent cement joints with proper interference fit.
  • ✅Precision MoldedMaintains dimensional accuracy to ensure leak-resistant installations and reduced rework.
  • ✅Non-Conductive MaterialOffers insulation properties and corrosion resistance in chemical-free environments.
  • ✅UV-ResistantAcceptable for above-ground outdoor use when properly painted or protected.

Technical Specifications

  • MaterialRigid polyvinyl chloride (PVC), Type I, Grade I per ASTM D1784
  • Nominal Size2 inch
  • Wall TypeSchedule 40
  • End ConnectionSlip x Slip (Socket)
  • Applicable StandardsASTM D2466, NSF 14/61, and UPC listed for DWV systems
  • Temperature Rating140°F maximum service temperature

Installation Guidance

Proper installation requires pipe end cleaning and priming per ASTM standards, followed by solvent cement application to both socket and pipe. Ensure full pipe insertion and hold until initial set occurs. Cure time is dependent on temperature, pipe size, and ambient humidity. Do not pressurize system until full cure has been achieved as per the cement manufacturer’s instructions.

Application Areas

This 90° elbow is commonly installed in

  • Drainage and vent piping in residential and commercial buildings
  • Irrigation distribution lines and valve manifolds
  • Low-pressure, open-loop industrial fluid handling systems

Code Note

Schedule 40 PVC is recognized by most plumbing codes for DWV and non-pressure systems. For pressurized potable water systems, use CPVC or Schedule 80 components where required by local jurisdiction.

Rely on the 2 inch PVC Schedule 40 90° Elbow for accurate alignment, durable performance, and long-term integrity in your piping layout. Designed for efficiency and consistency in the field, it’s a staple fitting for professional-grade installations.

Specifications

Specifications Weight 0.370000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Length (inches) 3.79 Width (inches) 2.74 Height (inches) 3.79 End Style Plastic x Plastic Side A 2″ Side B 2″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN 406-020 Material PVC Schedule 40 Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

406-020

0
Scroll to Top