2 Inch SDR 11 Con-Stab Pipe Adapter – Male Iron Pipe Size (IPS) Connection
The2 inch SDR 11 Con-Stab Pipe Adapterwith male IPS threads is engineered for use with medium-density polyethylene (MDPE) gas piping systems. Designed to join PE tubing to a female threaded metal fitting, this transition component ensures structural integrity and gas-tight performance in underground or above-ground distribution systems.
Technical Overview
- Size2 inch nominal
- Wall StandardSDR 11 (Standard Dimension Ratio)
- ConnectionCon-Stab compression fitting to male NPT
- MaterialHigh-density polyethylene and corrosion-resistant metal insert
- Pressure RatingDesigned for gas pressure systems up to 125 psi when installed per manufacturer specifications
- Temperature Range20°F to 140°F (operational)
- CertificationsComplies with ASTM D2513 and ANSI B1.20.1
Performance Characteristics
- Mechanical Joint IntegrityCompression-style stab connection ensures uniform grip on polyethylene pipe
- Threaded TransitionMale IPS threads facilitate direct connection to metallic gas system components
- Corrosion ResistanceEngineered for buried or exposed applications with minimal degradation over time
- No Heat Fusion RequiredEliminates the need for fusion equipment or open flame in the transition zone
Installation Considerations
This fitting must be installed following the manufacturer’s published instructions, including use with chamfered pipe ends and internal stiffener (when required). Ensure full stab depth and visual indicator engagement prior to pressurization. Proper torque should be applied to the male threads using thread sealant approved for gas service.
Application Use
Commonly deployed in municipal gas distribution, underground PE gas service lines, and regulated natural gas or propane installations. This adapter supports safe integration of polyethylene service piping into steel or brass manifolds, regulators, or valves.
Important Note
This fitting is intended for use in gas systems only and should not be used in potable water or compressed air systems. Always verify local codes and material compatibility before installation.
The2 Inch SDR 11 Con-Stab Pipe Adapter Male IPSdelivers a reliable polyethylene-to-metal transition for gas distribution systems where heat fusion is not feasible or permitted.
Specifications
Buying Information
Match the listed pipe adapter identity and specifications to the existing component before ordering.




