2” x 1-1/4” Copper Reducing Tee – Wrought Copper Tee for Sweat Connections
The2” x 1-1/4” Copper Reducing Teeis a solder-joint fitting used in copper piping systems to branch off from a 2-inch main line to a 1-1/4-inch branch line. Manufactured from lead-free wrought copper, it is designed for use in potable water, hydronic heating, and other low-pressure fluid conveyance systems.
This fitting features three socket (sweat) ends and is fabricated to conform to ASME B16.22 and ASTM B75/B88 material and dimensional standards. Its corrosion resistance, mechanical strength, and uniform wall thickness make it suitable for both new construction and retrofit applications in residential and commercial plumbing systems.
Performance Characteristics
- ✅Lead-Free ConstructionMeets NSF/ANSI 61 and 372 for potable water applications.
- ✅Connection EndsThree socket-type sweat ends compatible with standard copper tube sizes.
- ✅MaterialWrought copper (C12200), suitable for soldering and brazing techniques.
- ✅OrientationTee configuration with reducing branch outlet for system transitions.
- ✅System CompatibilityApplicable to Type L, M, or K copper tubing.
Installation Guidelines
Deburr and clean mating tube ends and fitting sockets prior to applying flux. Insert tubing to full depth and solder using appropriate heating techniques for the joint size and wall thickness. Ensure uniform heat distribution and proper solder flow to achieve full circumferential bonding.
- Required ToolsTorch, lead-free solder, flux, tube cutter, and cleaning brushes.
- RecommendedPressure-test all joints after cooling per local code before final enclosure.
Application Scope
This reducing tee is used to transition from 2-inch copper mains to 1-1/4-inch branches in potable water distribution, heating loops, or recirculation circuits. Suitable for horizontal or vertical installation and compatible with both residential and commercial system layouts.
Technical Specifications
- Nominal Size2” x 2” x 1-1/4” (run x run x branch)
- Connection TypeFemale sweat (socket) ends
- Design StandardASME B16.22
- Material StandardASTM B75/B88
- CertificationsNSF/ANSI 61 & 372 (lead-free)
Code Note
Lead-free copper fittings are mandated for potable water systems under the Safe Drinking Water Act (SDWA) and are compliant in all U.S. jurisdictions. Always verify system pressure and application compatibility prior to installation.
Specifications
Buying Information
Confirm the listed configuration and specifications for MPN W 40104 before ordering.




