Apollo PowerPress
2″ x 2″ x 1″ Carbon Steel Press Reducing Tee – Gas Rated
The2 inch x 2 inch x 1 inch Carbon Steel Gas Press Reducing Teeis engineered for mechanically joined carbon steel piping systems conveying fuel gas. This reducing tee provides a compact solution for transitioning to a reduced branch size while maintaining structural integrity under elevated system pressures.
Product Features and Material Performance
Manufactured from ASTM A420-grade carbon steel, this tee is designed for use in press-connect gas systems and is compatible with standard carbon steel press tools and sealing elements. It supports safe gas distribution in compliance with prevailing mechanical codes and performance requirements.
- ✅Formed and Machined EndsPrecision press profiles ensure uniform sealing and mechanical retention with compatible jaw sets.
- ✅Carbon Steel ConstructionProvides high strength and impact resistance suitable for natural gas and propane systems.
- ✅Reduced Outlet DesignAllows transition from 2″ main to 1″ branch while maintaining optimal flow paths and reducing turbulence.
- ✅Zinc-Coated ExteriorEnhances corrosion protection in concealed or exposed indoor environments.
- ✅Leak Detection CompatibilityIncludes features compatible with standard press fitting leak-detection systems during pressure testing.
Technical Specifications
- MaterialCarbon Steel (ASTM A420 or equivalent)
- End ConnectionsPress x Press x Press (Reduced Branch)
- Nominal Sizes2″ Main x 1″ Branch
- Sealing ElementFactory-installed EPDM or HNBR O-ring (depending on application spec)
- CertificationConforms to ANSI LC-4 / CSA 6.32, NFPA 54, and ICC standards for fuel gas piping
Typical Applications
This reducing tee is commonly specified in fuel gas systems for commercial buildings, multi-unit residential structures, and institutional facilities. It enables compact, no-flame connections in retrofit and new construction projects where brazing or threading is not permitted or practical.
Installation Considerations
Press connections require properly calibrated pressing tools, matching jaws or rings, and verification of fitting alignment and insertion depth. All joints should be visually inspected and pressure-tested according to local code requirements. Not for use in underground systems without manufacturer-approved protection.
The2″ x 2″ x 1″ Carbon Steel Gas Press Reducing Teesupports time-efficient, code-compliant gas system installations with no flame, fumes, or welding permits required. A reliable component for high-performance mechanical gas distribution networks.
Specifications
Buying Information
Confirm the listed pipe sizes and connection configuration match the system before ordering.




