Skip to content
Need help identifying a part? Contact parts support
SKU: 5862Brand: Non-Specified Brand
,

2 inch x 4 inch Black Steel Nipple

$1.09

2″ x 4″ Black Steel Nipple – Threaded Connector for Pressure Piping Systems The 2″ x 4″ Black Steel Nipple is a schedule-rated carbon steel fitting used for direct-threaded connections in high-pressure fluid and gas distribution systems.

Quantity

2″ x 4″ Black Steel Nipple – Threaded Connector for Pressure Piping Systems

The2″ x 4″ Black Steel Nippleis a schedule-rated carbon steel fitting used for direct-threaded connections in high-pressure fluid and gas distribution systems. Its machined NPT threads allow for consistent engagement with fittings, valves, or pipe sections, supporting mechanical integrity in both horizontal and vertical configurations.

Fabricated from black (uncoated) steel, this nipple is suitable for non-potable systems where corrosion from water or chemicals is not a primary concern. Typical applications include compressed air, natural gas, hydronic heating, and industrial process piping installations where rigid pipe support and long-term sealing performance are critical.

Performance Attributes

  • ✅Threaded NPT EndsNational Pipe Tapered threads ensure a mechanically sealed connection when paired with compatible components and thread sealant.
  • ✅4-Inch LengthUseful for close-coupling assemblies or component spacing within confined mechanical layouts.
  • ✅Material GradeManufactured from seamless or welded carbon steel per ASTM A53, suitable for general-purpose mechanical systems.
  • ✅Black FinishIdeal for use in gas systems and other applications where galvanization is not required or permitted.
  • ✅Temperature and Pressure TolerantPerforms reliably under moderate to elevated service conditions per applicable schedule and system design.

Specifications

  • Nominal Size2 inches
  • Length4 inches
  • Thread TypeMale NPT x NPT
  • MaterialBlack carbon steel (non-galvanized)
  • StandardsConforms to ASME B1.20.1 threading; ASTM A733 for dimensions and tolerances

Installation Guidelines

Threaded joints should be sealed with PTFE tape or compatible pipe dope to prevent gas or fluid leakage. Use opposing pipe wrenches during installation to ensure even torque and prevent distortion of mating components. Ensure alignment and thread engagement meet project pressure rating and local code requirements. Over-torquing or misalignment may result in joint failure under pressure.

Application Context

This fitting is frequently installed in gas distribution lines, steam and hydronic loops, boiler connections, and industrial mechanical assemblies. Its short overall length is ideal for tight equipment manifolds, valve tie-ins, or elevation offsets in rigid pipe runs.

Engineering Note

Black steel pipe and fittings are standard in mechanical trades for gas and air systems due to their tensile strength and resistance to deformation. They are not rated for use in potable water systems or corrosive environments without protective coatings or linings.

The2″ x 4″ Black Steel Nippleprovides a code-compliant, pressure-rated solution for short-distance connections in commercial, industrial, and mechanical piping systems requiring consistent performance and installation efficiency.

Specifications

Specifications Weight 1.220000 Brand Non-Specified Brand ADA Compliance No Length (inches) 4 Width (inches) 2 Height (inches) 2 Side A 2″ Side B 4″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 588-040 Material Black Steel Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

588-040

0
Scroll to Top