Skip to content
Need help identifying a part? Contact parts support
SKU: 2309Brand: Crown Engineering
,

3/16″ x 8″ Copper Crown Oil Line

$0.92

Details Model: 40451 Manufacturer: Crown Engineering Corporation Product Name: Copper Oil Line – Straight Part Number: 2309 Description: Straight copper oil line assembly, 3/16-inch outside diameter x 8-inch length, factory-flared ends with flare nuts, manufactured from Mueller St…

Quantity

Details

Model40451
ManufacturerCrown Engineering Corporation
Product NameCopper Oil Line – Straight
Part Number2309
DescriptionStraight copper oil line assembly, 3/16-inch outside diameter x 8-inch length, factory-flared ends with flare nuts, manufactured from Mueller Streamline copper tubing in accordance with ASTM-B280 and ANSI-B9.1 standards.

Product Overview

The Crown Engineering 40451 Copper Oil Line is a precision-fabricated, straight-line assembly designed for professional oil burner, fuel system, and HVAC service applications. Manufactured using genuine Mueller Streamline dehydrated and nitrogen-purged copper tubing, each assembly maintains a consistent dead-soft temper and contamination-free interior. The tubing is cleaned, dried, and sealed under nitrogen to prevent oxidation or moisture retention prior to installation. Each oil line includes factory-flared ends with installed flare nuts, allowing for direct field connection without on-site flaring or fabrication. This pre-assembled design minimizes labor and ensures leak-free performance in residential and light commercial burner systems.

Technical Specifications

  • Manufacturer Part Number40451
  • Alternate Part Number2309
  • Product TypeCopper Oil Line Assembly – Straight
  • Outside Diameter (OD)3/16 inch
  • Length8 inches
  • MaterialMueller Streamline copper tubing
  • TemperDead soft (annealed) for easy bending and installation
  • Manufacturing StandardsASTM-B280 and ANSI-B9.1 (Refrigeration and Fuel Service Tubing)
  • Internal PreparationDehydrated and nitrogen-purged, sealed ends
  • Surface FinishBright, oxidation-free exterior
  • End ConfigurationFactory-flared both ends with flare nuts installed
  • Flare Type45-degree single-flare per SAE J512 standard
  • Operating Pressure RangeSuitable for standard oil burner suction/vacuum lines and low-pressure return service
  • Temperature RangeRated for standard heating oil operating temperatures
  • Corrosion ResistanceInherent to copper alloy; suitable for indoor and protected installations
  • PackagingIndividually packaged to prevent contamination and deformation during transport
  • ApplicationOil burner supply lines, fuel transfer piping, and general HVAC service installations

Installation Notes

  • Install using standard flare fittings compatible with 45° SAE flared connections.
  • Ensure flare seat surfaces are clean and free from debris prior to assembly.
  • Do not solder or braze flared connections; use proper mechanical tightening techniques.
  • Support tubing to prevent vibration fatigue and maintain proper routing clearances.
  • Check all joints for vacuum integrity during commissioning of the oil delivery system.
  • Use approved thread sealants on male flare fittings only when specified by manufacturer.

Summary

The Crown Engineering 40451 Copper Oil Line (3/16″ x 8″) is a pre-fabricated, nitrogen-purged, and factory-flared copper tubing assembly manufactured from Mueller Streamline material. Designed for professional HVAC and fuel oil system installations, it meets ASTM-B280 and ANSI-B9.1 standards, ensuring precise fitment, clean internal surfaces, and reliable long-term performance in oil burner and fuel delivery systems.

Specifications

Specifications Weight 0.100000 Brand Crown Engineering ADA Compliance No Diameter 3/16 in Length (inches) 8 Width (inches) 2 Height (inches) 1 Item Type Oil Fittings and Parts MPN 40451 Sub Type Oil Line Manufacturer Crown Engineering Item Returns This item can be returned
Brand

Crown Engineering

MPN

40451

0
Scroll to Top