Product Overview
The B&K 110-224HN Gas Ball Valve is a 3/4-inch forged brass, two-piece valve designed for professional-grade gas and fluid control systems. Built for reliability and compliance with industry safety standards, this valve features full port construction, quarter-turn operation, and female NPT threaded ends conforming to ANSI B1.20.1 specifications. Suitable for use in natural gas, propane, and approved water service applications, the 110-224HN is CSA 3-88 and UL listed for dependable service in residential, commercial, and industrial systems.
Technical Specifications
- ManufacturerB&K
- Model Number110-224HN
- Description2-Piece Gas Ball Valve – Lever Handle, Female Threaded Ends
- Reference Number2032306
- Nominal Size3/4 in (19 mm)
- Body Type2-piece forged brass construction
- Port TypeFull port for unrestricted flow
- Connection TypeFemale Iron Pipe (FIP) threaded ends per ANSI B1.20.1
- Valve OperationQuarter-turn manual operation
- Handle TypeZinc-plated steel lever handle with vinyl grip
- Material Construction
- Body: Forged brass
- Ball: Chrome-plated brass
- Seats: PTFE (Teflon)
- Stem: Brass with blow-out proof design
- Pressure Ratings
- Gas service per CSA 3-88 certification
- 200 WOG (Water, Oil, Gas) non-shock rating
- Temperature RangeSuitable for standard natural gas and propane operating conditions; water service up to 200°F (93°C)
- Certifications and Approvals
- CSA 3-88 Certified for gas service
- CSA Certified for general use
- UL Listed for fuel gas applications
- Flow Control90° quarter-turn mechanism for full open or closed position
- Applications
- Natural gas and propane distribution systems
- Commercial and residential heating appliance connections
- Water and low-pressure liquid service (non-potable)
- Installation Requirements
- Threaded installation per ANSI B1.20.1 specifications
- Apply approved thread sealant for gas-rated connections
- Ensure alignment with flow direction marking before tightening
- Performance Characteristics
- Positive shutoff with low operating torque
- Leak-tight design under rated pressure
- Corrosion-resistant forged brass construction
- MaintenancePeriodic inspection recommended; replace valve if leakage or wear is detected
- Operating EnvironmentIndoor or outdoor applications under standard gas service conditions
- Compliance
- ANSI B1.20.1 – Threaded pipe connections
- CSA and UL listings for gas and fluid service
- Manufactured under ISO 9001:2015 quality system certification
- Country of ManufactureUnited States
Summary
The B&K 110-224HN 3/4-inch Gas Ball Valve is a forged brass, two-piece valve featuring full port design, quarter-turn operation, and ANSI B1.20.1 threaded FIP ends. CSA 3-88 and UL approved, it provides dependable shutoff and control for gas and 200 WOG-rated water applications in professional plumbing and mechanical systems.
Specifications
Buying Information
Verify the MPN and listed configuration (without a guard body) before ordering.





