Skip to content
Need help identifying a part? Contact parts support
SKU: 1946984Brand: Non-Specified Brand
,

3/4 inch Brass Cap

$1.96

3/4 inch Lead-Free Brass Pipe Cap – Female Threaded, ANSI B1.20.1 The 3/4 inch brass pipe cap is designed to terminate the end of a male-threaded pipe in potable water, air, oil, or low-pressure gas systems.

Quantity
SKU: 1946984 Categories: ,

3/4 inch Lead-Free Brass Pipe Cap – Female Threaded, ANSI B1.20.1

The 3/4 inch brass pipe cap is designed to terminate the end of a male-threaded pipe in potable water, air, oil, or low-pressure gas systems. Manufactured from lead-free brass in accordance with ASTM and NSF/ANSI standards, this fitting provides corrosion resistance and a secure seal in threaded piping applications where closure is required without disassembly.

Its female National Pipe Taper (NPT) threads ensure compatibility with standard threaded pipe and fittings. The cap is suitable for both above-ground and in-wall installations and is commonly used for capping service lines, test ports, and system extensions during rough-in or maintenance phases.

Technical Specifications

  • Nominal Size3/4 inch NPT (female thread)
  • MaterialLead-free brass (compliant with NSF/ANSI 61 and 372)
  • Connection TypeFIP (Female Iron Pipe / NPT)
  • Operating PressureUp to 200 PSI (non-shock, water/oil/air)
  • Temperature Range20°F to 180°F

Common Applications

  • • Potable and non-potable water system terminations
  • • Air compressor lines or low-pressure pneumatic systems
  • • HVAC hydronic circuit test ports or isolation points
  • • Plumbing rough-in closure during system staging

Installation Guidelines

Apply PTFE thread tape or approved thread sealant to the male pipe threads before tightening the cap. Use a properly sized wrench for final torque on the hex body to ensure a leak-free seal. Do not over-tighten to avoid thread damage. Install per applicable plumbing and mechanical codes.

Material Note

Lead-free brass fittings are required in all potable water systems as per U.S. Safe Drinking Water Act amendments. The alloy used in this cap provides durability, chemical resistance, and long-term performance in residential, commercial, and light industrial applications.

Specifications

Specifications Weight 0.140000 Brand Non-Specified Brand ADA Compliance No Length (inches) 2.15 Width (inches) 1.25 Height (inches) 0.85 Side A 3/4″ Fitting Type Caps Item Type Fittings Manufacturer Non Specified Manufacturer MPN B-CA04LF Material Brass Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed pipe cap configuration and MPN B-CA04LF before ordering.

Brand

Non-Specified Brand

MPN

B-CA04LF

0
Scroll to Top