3/4 Inch Carbon Steel 477 1G Gas Press Flange Adapter – ANSI-Class Transition for Press Gas Systems
The 3/4 inch Carbon Steel 477 1G Gas Press Flange Adapter is a mechanical transition fitting used to connect carbon steel press piping to flanged system components in regulated fuel gas networks. Designed to interface with ANSI B16.5 Class 150 flanges, this fitting allows safe, leak-resistant connections in both new and retrofit installations where flanged equipment is required.
Engineered for Fuel Gas Distribution Systems
This adapter is constructed from corrosion-resistant, zinc-plated carbon steel and includes a factory-installed yellow HNBR (or EPDM) sealing element, rated for compatibility with natural gas and propane. Its press connection integrates with standard TH or V-profile press tools, enabling flame-free installation that supports jobsite safety and speed.
- ✅Press ConnectionCompatible with carbon steel press systems and calibrated jaw tools (TH/V)
- ✅Flange InterfaceMatches ANSI B16.5 Class 150 bolt pattern for direct equipment or valve connection
- ✅Sealing ElementFactory-installed yellow HNBR or EPDM gasket rated for fuel gas service per ANSI LC-4 / CSA 6.32
- ✅Material CompositionCarbon steel with zinc coating for external corrosion resistance
- ✅Leak Detection FunctionalityUnpressed connections are visually detectable during pressure testing procedures
Technical Specifications
- Nominal Size3/4 inch
- Max Operating Pressure125 psi (fuel gas)
- Temperature Range40°F to 180°F (based on gasket specification)
- Standards ComplianceConforms to ANSI LC-4 / CSA 6.32, NFPA 54 (National Fuel Gas Code)
Use Case Applications
Flange adapters like the 477 1G are used in branch takeoffs and terminal points where flanged valves, meters, appliance manifolds, or isolation components must be integrated into press-based fuel gas systems. Commonly found in mechanical rooms, rooftop HVAC equipment, and inline service transitions.
Installation Guidance
Prior to installation, ensure pipe ends are cut square, deburred, and marked for insertion depth. Use approved press tools with correct jaw profiles to complete the press connection. Flange side should be bolted to mating component per torque specifications to ensure uniform gasket compression. Always perform pressure testing using inert gas or air per local code.
Material Note
Carbon steel with zinc-plated finish is widely used in fuel gas infrastructure due to its mechanical strength and stability under temperature fluctuation. The press-to-flange configuration simplifies assembly while maintaining joint reliability and access flexibility for maintenance.
The 3/4 Inch Carbon Steel 477 1G Gas Press Flange Adapter is a dependable transition component for gas press systems requiring ANSI flange integration. Its performance, material compliance, and ease of installation make it a reliable choice for high-integrity gas distribution projects.
Specifications
Buying Information
Confirm the listed model and configuration against the application before ordering.




