3/4 inch Stainless Steel 90° Elbow – Female Threaded Ends
The 3/4 inch Stainless Steel 90° Elbow with Female National Pipe Thread (FNPT) connections is engineered for demanding fluid handling systems. Designed to facilitate right-angle transitions between pipe segments, this elbow is ideal for corrosive environments and pressure-rated piping systems where reliability is critical.
Performance and Material Advantages
- ✅Material CompositionFabricated from 304 or 316 stainless steel, providing superior corrosion resistance in potable water, chemical, and industrial piping systems.
- ✅Thread TypeMachined NPT threads (ANSI B1.20.1) ensure compatibility with standard pipe fittings and create tight mechanical seals when used with appropriate thread sealant.
- ✅Working PressureRated for up to 150 psi at ambient temperature when used in schedule 40 stainless systems (verify rating based on specific alloy and wall thickness).
- ✅Temperature RangeSuitable for operating temperatures from -20°F to 450°F depending on system configuration.
Professional-Grade Features
- ✅90-Degree BendAllows directional changes in confined installations while maintaining system integrity and flow rate.
- ✅Structural IntegrityUniform wall thickness and precision-machined threads reduce stress points and enhance pressure handling capability.
- ✅Code ComplianceComplies with ASTM A351 (for cast fittings) or ASTM A182 (for forged fittings), as applicable.
- ✅Thread Seal IntegrityDesigned to be used with PTFE tape or thread sealant to maintain leak-free operation under variable load conditions.
Installation Guidelines
Install using standard pipe wrenches with care to avoid over-torquing. Apply PTFE tape or compatible thread sealant to male threads prior to connection. For optimal alignment, hand-tighten followed by an appropriate number of wrench turns as per standard torque guidelines for stainless steel pipe threads.
Application Environments
This 3/4 inch stainless steel elbow is widely used in commercial mechanical rooms, chemical processing lines, food-grade process systems, potable water distribution, and high-humidity environments. Its corrosion resistance and mechanical strength make it suitable for both indoor and exposed installations.
Did You Know?
Unlike galvanized or black iron fittings, stainless steel elbows offer long-term resistance to internal scaling and external oxidation, which contributes to improved hydraulic efficiency and system longevity.
Technical Data
- Size3/4 inch nominal pipe size
- ConnectionFNPT x FNPT
- Material304 or 316 Stainless Steel (specify alloy if required)
- StandardANSI B16.3 / MSS SP-114 compliant where applicable
The3/4 inch Stainless Steel 90° Elbowprovides dependable, corrosion-resistant performance in threaded piping systems. It is an essential fitting for professionals working in fluid handling, HVAC, water distribution, or chemical processing pipelines where reliability and material integrity cannot be compromised.
Specifications
Buying Information
Confirm the listed pipe elbow configuration and MPN SSF304L9004 before ordering.




