3/4 Inch x 3/4 Inch x 1/2 Inch Carbon Steel Press Reducing Tee – Gas Rated
The 3/4″ x 3/4″ x 1/2″ Carbon Steel Gas Press Reducing Tee provides a secure method for branching gas lines in press-connect systems. Designed for use in fuel gas distribution, this tee features a reduced outlet for connecting a smaller branch while maintaining flow through the main line. The press connection design supports efficient, flame-free installation using approved press tools.
Product Advantages for Gas Distribution Systems
- ✅Carbon Steel Body– Constructed from durable carbon steel with corrosion-resistant zinc-plated coating for longevity in gas applications.
- ✅Press Connection Interface– All ends feature press-fit geometry for compatibility with standard press tools and jaws (e.g., TH, H profiles).
- ✅Factory-Installed Sealing Element– Yellow HNBR sealing rings rated for fuel gas service and temperature extremes.
- ✅Reduced Branch Size– Provides an efficient method for integrating 1/2 inch lines into 3/4 inch systems without separate bushings or reducers.
- ✅Code-Compliant– Manufactured in accordance with performance standards for fuel gas press fittings, including ANSI LC 4 and ICC codes.
Technical Specifications
- MaterialCarbon Steel (zinc-coated exterior)
- ConnectionPress x Press x Press (Reducing Tee)
- Nominal Sizes3/4 inch x 3/4 inch x 1/2 inch
- Seal MaterialHNBR (Hydrogenated Nitrile Butadiene Rubber), gas-rated
- Maximum PressureUp to 125 PSI (for fuel gas systems)
- Temperature Range40°F to 180°F (depending on system configuration)
Application Use
This carbon steel reducing tee is used in low- and medium-pressure gas distribution systems across residential, commercial, and light industrial environments. Typical installations include branch lines for gas-fired appliances, heaters, boilers, and kitchen gas connections. The press-fit connection allows rapid installation without threading, soldering, or welding, reducing labor time and improving jobsite efficiency.
Installation Considerations
Use with manufacturer-approved press tools and jaws. Inspect sealing elements and pipe ends before pressing. Ensure pipe is cut square and deburred for a proper seal. Not compatible with potable water systems; for fuel gas use only.
The 3/4 inch x 3/4 inch x 1/2 inch Carbon Steel Gas Press Reducing Tee offers a reliable branch solution where press-connect technology is specified. It supports safe, efficient installation and consistent performance in accordance with applicable gas codes.
Specifications
Buying Information
Confirm the listed pipe sizes and connection configuration match the system before ordering.




