Honeywell V8043E1012/U Zone Valve – Two-Way Low Voltage Control for Hydronic Systems
The Honeywell V8043E1012/U is a two-way on/off zone valve designed for hydronic heating systems requiring precise control of water flow. Operating on 24 VAC, this low voltage valve provides dependable isolation of individual zones in hot water heating applications. The motorized actuator controls the valve position based on external thermostat signals.
System and Application Use
- Valve TypeTwo-way, normally closed, spring return
- Control SignalOperates on 24 VAC from a low-voltage thermostat or controller
- OperationOpens fully in response to thermostat demand; spring returns to closed position when power is removed
- End SwitchIntegral end switch rated for 50 VA at 24 VAC for control of circulator or boiler
- Connection1/2″ sweat connections for copper tubing
Key Features
- Motor-Driven ActuationProvides positive valve positioning with spring return fail-safe
- Replaceable PowerheadAllows servicing without draining the system
- Built-In End SwitchEnables coordinated control with system pump or burner
- ApplicationSuitable for zoning in closed-loop hot water systems
- Rated Voltage24 VAC, 60 Hz
Technical Specifications
- Model NumberV8043E1012/U
- Line Size1/2 in. sweat connection
- Voltage24 VAC, 60 Hz
- Max Ambient Temp125°F (52°C)
- Max Fluid Temp240°F (116°C)
- Max Static Pressure20 psi differential
Installation Considerations
This valve is intended for installation in closed-loop hydronic systems. For optimal performance and safety, it should be installed by qualified HVAC professionals familiar with zoning controls. Orientation must allow proper drainage from the actuator housing, and electrical connections should comply with NEC requirements.
Contractor Notes
- End switch wiring simplifies interlock with system components
- Actuator and valve body designed for service separation—no need to drain system for head replacement
- Compatible with Honeywell and other 24V thermostatic zone control systems
- Low power draw suitable for multi-zone panel integration
Performance Summary
- Actuator TypeMotorized with spring return
- Position FeedbackEnd switch closes when valve is fully open
- Wiring Terminals18″ pre-stripped leads
- MountingHorizontal preferred; vertical acceptable if moisture is controlled
Specifications
Buying Information
Verify the model, connection, dimensions, and application details against the source listing before ordering.





