TracPipe® CounterStrike® FGP-CS-750-100 – 3/4″ x 100′ CSST for Natural Gas and Propane Applications The TracPipe® CounterStrike® FGP-CS-750-100 is a 100-foot coil of 3/4″ nominal diameter corrugated stainless steel tubing (CSST) with an integrated energy-dissipating jacket for natural gas and LP distribution. Designed for use in residential, commercial, and industrial gas systems, this flexible piping reduces the need for multiple fittings and bends, allowing efficient routing with fewer mechanical joints. The non-annealed stainless steel core enhances crush resistance, while the black conductive jacket minimizes the risk of lightning-induced electrical arcing—up to 400 times more resistant than standard yellow CSST. This tubing is listed to ANSI LC 1/CSA 6.26 and tested to ASTM E84 surface burning characteristics. Key Features Crush-Resistant Core – Non-annealed 300-series stainless steel tubing resists deformation under mechanical stress Energy-Dissipating Jacket – Reduces transient energy, improving system safety during lightning events Simplified Routing – Flexible semi-rigid tubing can be pulled through framing with minimal elbows or couplings AutoSnap® Compatibility – Works with tool-free AutoSnap® fittings for faster and more secure terminations Exterior-Grade Protection – Jacket is flame-retardant, UV and ozone resistant, suitable for exposed and concealed installations Specifications Nominal Tubing Size: 3/4 inch Inside Diameter: 0.82 inches Outside Diameter: 1.14 inches Wall Thickness: 0.010 inches Length: 100 feet (coil) Operating Pressure: 25 psi max Temperature Rating: -20°F to 200°F Tubing Material: 300-series corrugated stainless steel Jacket Material: Black conductive polymer Certifications: ANSI LC 1 / CSA 6.26, ASTM E84, ICC Codes (IFGC, IPC), NFPA 54 / ANSI Z223.1 Warranty: 1-year limited (manufacturer standard) Application Scope Natural gas and propane distribution for heating appliances, water heaters, cooking equipment, and standby generators Indoor and outdoor gas systems in new construction or retrofit applications Permitted for above-ground use in both concealed and exposed locations, per code Installation Guidelines Installation must comply with manufacturer instructions and all applicable local and national fuel gas codes. CounterStrike® may reduce bonding requirements in some jurisdictions but does not eliminate them universally. Proper grounding and the use of approved fittings are required. This product is intended for use by licensed professionals with experience in fuel gas piping systems.
Specifications
Buying Information
Confirm FGP-CS-750-100 and the listed size, connection, or application before ordering.




