Skip to content
Need help identifying a part? Contact parts support
SKU: 5320Brand: Non-Specified Brand
,

3/8 inch Copper 90 Degree Elbow Copper x Copper

$1.41

3/8 inch Copper 90° Elbow – Wrought Fitting for Sweat Applications The 3/8 inch Copper 90 Degree Elbow is a precision-formed wrought copper fitting used to create right-angle changes in direction within Type K, L, or M copper tubing systems.

Quantity
SKU: 5320 Categories: ,

3/8 inch Copper 90° Elbow – Wrought Fitting for Sweat Applications

The 3/8 inch Copper 90 Degree Elbow is a precision-formed wrought copper fitting used to create right-angle changes in direction within Type K, L, or M copper tubing systems. Commonly installed in water supply, hydronic heating, and refrigeration lines, this elbow supports clean, efficient directional transitions in compact piping layouts.

Manufacturing and Material Properties

Fabricated from lead-free alloy C12200 (deoxidized high-phosphorus copper), this elbow exhibits excellent thermal conductivity, corrosion resistance, and brazing characteristics. Its seamless construction ensures long-term mechanical integrity under varying pressure and temperature loads.

Technical Specifications

  • MaterialWrought Copper (Alloy C12200, lead-free)
  • Size3/8 inch nominal
  • Connection TypeCopper tube (sweat/solder connection, socket x socket)
  • Fitting Angle90 degrees
  • Pressure RatingSuitable for up to 200 psi at 250°F (varies by system)
  • Standard ComplianceASME B16.22, NSF/ANSI 61 & 372, ASTM B75/B88

Installation Considerations

This elbow is designed for soldered or brazed joints. Proper cleaning, fluxing, and heat application are essential to create a uniform, leak-free seal. Ensure compatibility with pipe size and type per system specifications. Use with potable water systems, chilled water, compressed air, or low-pressure steam, depending on design intent and code requirements.

Common Applications

Widely used in residential and light commercial projects, this 90° elbow facilitates compact turning in copper tubing within wall cavities, ceiling voids, or equipment enclosures. It is often installed in bathroom risers, water heater branches, and distribution manifolds requiring directional transitions with minimal turbulence.

Industry Note

All copper fittings intended for potable water must now meet lead-free requirements per the Safe Drinking Water Act. This fitting complies with these regulations, offering full compatibility in regulated domestic water systems.

Specifications

Specifications Weight 0.030000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Length (inches) 0.7 Width (inches) 1.45 Height (inches) 0.6 End Style Copper x Copper Side A 3/8″ Side B 3/8″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN W 01617 Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed pipe elbow configuration and MPN W 01617 before ordering.

Brand

Non-Specified Brand

MPN

W 01617

0
Scroll to Top