3/8 Inch OD x 3/8 Inch Brass 90° Elbow – Compression x MIP
The 3/8 inch OD x 3/8 inch brass 90-degree elbow is a compact transition fitting used to change direction in dishwasher water supply connections. It features a 3/8 inch outer-diameter compression inlet and a 3/8 inch male iron pipe (MIP) thread outlet. This configuration supports a secure connection between copper, plastic, or braided supply lines and threaded dishwasher inlets or shutoff valves.
Construction and Material Details
- ✅MaterialLead-free brass (compliant with NSF/ANSI 61 and 372 for potable water use)
- ✅Inlet Connection3/8 inch OD compression – accepts soft copper or braided supply tubing
- ✅Outlet Connection3/8 inch MIP – threads into standard female threaded ports
- ✅Elbow Configuration90° bend allows for tight turns without kinking supply lines or stressing threads
Installation Requirements
Install compression side by sliding the nut and ferrule over the tubing and securing it to the body with an appropriate torque. Use thread sealant or PTFE tape on the male pipe thread to ensure a watertight joint. Over-tightening compression fittings can deform the ferrule or tubing—follow manufacturer torque specs when available. Designed for use in potable water applications only.
Common Applications
Frequently used in residential dishwasher installations where the supply line must turn 90 degrees to align with the appliance inlet. Also applicable in other confined locations requiring compact directional change between compression tubing and NPT threads.
Technical Specifications
- Nominal Size3/8 inch OD x 3/8 inch MIP
- TypeCompression x Male Iron Pipe
- MaterialForged or machined lead-free brass
- Maximum PressureTypically rated to 125–200 psi (verify with manufacturer)
- Temperature RatingUp to 180°F (typical for dishwasher supply)
- CertificationsNSF/ANSI 61 and NSF/ANSI 372 compliant
Code Compliance
This fitting meets federal lead-free requirements under the Safe Drinking Water Act and is approved for potable water systems in accordance with IPC, UPC, and local jurisdictional codes.
The 3/8 Inch OD x 3/8 Inch Brass 90° Elbow provides a reliable and space-saving connection between dishwasher water lines and threaded supply points. Its lead-free brass construction and compact profile make it a trusted solution for installations requiring code compliance and long-term performance.
Specifications
Buying Information
Match DWLLF to the existing connection and size before ordering.




