Details
Model2SVEPWCF0301
ManufacturerZ-Flex (Novaflex Group)
Product NameZ-Vent Single-Wall Stainless Steel Gas Vent Pipe with Locking Clamp
Part Number94715
Size3 inch Diameter x 12 inch (1 ft) Length
DescriptionSingle-wall stainless steel vent pipe with integrated locking clamp and Double Fail Safe™ self-sealing gasket system. Designed and certified for use with Category II, III, and IV gas-fired appliances operating under positive pressure conditions.
Product Overview
The Z-Flex 2SVEPWCF0301 Z-Vent Pipe is a high-performance stainless steel venting component engineered for gas-fired appliances requiring corrosion-resistant, positive-pressure vent systems. Fabricated from 430 stainless steel, the single-wall pipe delivers durability and dimensional stability for both residential and commercial mechanical systems. The female end incorporates a Double Fail Safe™ self-sealing gasket for a gas-tight connection, while the integrated locking clamp ensures mechanical joint integrity under system pressure. All Z-Vent products are factory-tested and listed to UL 1738 and ULC S636 standards for venting high-efficiency and condensing gas appliances.
Technical Specifications
- Manufacturer Part Number2SVEPWCF0301
- Alternate Part Number94715
- Product TypeSingle-Wall Gas Vent Pipe
- SeriesZ-Vent
- Pipe Diameter3 inches (76 mm)
- Pipe Length12 inches (305 mm)
- Material430 Stainless Steel
- Wall TypeSingle-wall
- End ConnectionMale/Female slip-fit with Double Fail Safe™ self-sealing gasket
- Joint SecurityIntegrated stainless steel locking clamp
- Temperature RatingUp to 550°F (288°C)
- Pressure RatingPositive pressure rated to 15 in. w.c.
- Appliance CategoryCategory II, III, and IV gas-fired appliances
- Corrosion ResistanceSuitable for acidic condensate and high-temperature flue gases
- Available Diameters3 to 24 inches
- Available LengthsStandard lengths up to 10 feet (3″ and 4″ diameters only)
- Cutting CapabilityPipe can be field-cut to specific length; ensure proper deburring
- Sealing MethodFactory-installed silicone gasket, Double Fail Safe™ design
- Mounting OrientationVertical or horizontal per manufacturer installation guide
- ComplianceUL 1738 (U.S.) and ULC S636 (Canada) listed for gas vent systems
- Surface FinishMill finish stainless steel
- Country of ManufactureUSA
Installation Notes
- Inspect all vent components before installation to confirm gasket integrity and correct dimensions.
- Verify gasket is fully seated in the female end before assembly; do not install with damaged or displaced gaskets.
- Engage connections fully, ensuring a tight fit before securing with the integrated locking clamp.
- Do not apply additional sealants unless specifically approved by Z-Flex installation instructions.
- Cut pipe to required length only using approved metal-cutting tools; deburr ends prior to assembly.
- Install in accordance with Z-Flex installation manual, appliance manufacturer’s venting requirements, and local codes.
- Maintain all required clearance distances from combustible materials per single-wall venting guidelines.
Summary
The Z-Flex 2SVEPWCF0301 Z-Vent 3″ x 12″ Single-Wall Stainless Steel Vent Pipe provides a durable, code-compliant venting solution for high-efficiency and condensing gas appliances. Featuring 430 stainless steel construction, a Double Fail Safe™ self-sealing gasket, and an integrated locking clamp, this vent component ensures gas-tight, secure installation in Category II, III, and IV positive-pressure applications.




