Details
Model2SVEPWCF0304
ManufacturerZ-Flex (Novaflex Group)
Product NameZ-Vent Single-Wall Stainless Steel Gas Vent Pipe with Locking Clamp
Part Number186820
Size3 inch Diameter x 48 inch (4 ft) Length
DescriptionSingle-wall stainless steel vent pipe section featuring a Double Fail Safe™ self-sealing gasket and integrated locking clamp. Engineered for venting Category II, III, and IV gas-fired appliances operating under positive pressure.
Product Overview
The Z-Flex 2SVEPWCF0304 Z-Vent pipe is a precision-engineered stainless steel venting component designed for professional installations where corrosion resistance, high-temperature stability, and gas-tight performance are required. Manufactured from 430 stainless steel, this 4-foot single-wall pipe is part of the Z-Vent modular vent system, incorporating the proprietary Double Fail Safe™ self-sealing gasket to ensure reliable joint integrity. The integrated locking clamp secures each connection for positive-pressure operation. This component is field-trimmable and suitable for both horizontal and vertical vent configurations. The Z-Vent line is fully certified to UL 1738 and ULC S636 for venting of high-efficiency and condensing gas appliances.
Technical Specifications
- Manufacturer Part Number2SVEPWCF0304
- Alternate Part Number186820
- Product TypeSingle-Wall Gas Vent Pipe
- SeriesZ-Vent
- Pipe Diameter3 inches (76 mm)
- Pipe Length48 inches (1219 mm)
- Material430 Stainless Steel
- Wall TypeSingle-wall construction
- End ConnectionMale/Female slip-fit with Double Fail Safe™ self-sealing gasket
- Joint RetentionIntegrated stainless steel locking clamp
- Temperature RatingUp to 550°F (288°C)
- Pressure RatingPositive pressure rated up to 15 in. w.c.
- Application CategoryCategory II, III, and IV gas appliances
- Corrosion ResistanceResists acidic condensate and high-temperature flue gases
- Available Diameters3 to 24 inches
- Available LengthsStandard lengths up to 10 ft (3″ and 4″ diameters only)
- Cutting CapabilityCan be field-trimmed to length; ensure ends are deburred after cutting
- Sealing MethodFactory-installed silicone gasket (Double Fail Safe™ configuration)
- Mounting OrientationVertical or horizontal installation
- ComplianceUL 1738 (U.S.) / ULC S636 (Canada) for Category II, III, and IV venting systems
- Surface FinishMill finish stainless steel
- Country of ManufactureUSA
Installation Notes
- Inspect all vent components prior to installation to confirm gasket integrity and fitment.
- Ensure the silicone gasket in the female end is seated properly before assembly.
- Fully engage male and female connections, then tighten the integrated locking clamp to secure the joint.
- Do not use sealants or lubricants unless specifically approved in Z-Flex installation documentation.
- Cut pipe only with approved metal-cutting tools; clean and deburr edges prior to assembly.
- Install in accordance with the Z-Flex installation manual, appliance manufacturer’s instructions, and applicable mechanical codes.
- Maintain clearance to combustibles as specified for single-wall vent systems.
Summary
The Z-Flex 2SVEPWCF0304 Z-Vent 3″ x 48″ Single-Wall Stainless Steel Gas Vent Pipe provides a durable, corrosion-resistant solution for venting high-efficiency and condensing gas appliances. With Double Fail Safe™ self-sealing gaskets, integrated locking clamps, and positive-pressure-rated stainless construction, this vent component ensures reliable, code-compliant performance for professional mechanical and HVAC installations.




