Skip to content
Need help identifying a part? Contact parts support
SKU: 6922Brand: Non-Specified Brand
,

4 inch x 2 inch or 1-1/2 inch PVC DWV Saddle Tee

$6.42

4 Inch x 2 Inch or 1-1/2 Inch PVC DWV Saddle Tee – For Horizontal Drainage Connections The 4 inch x 2 inch or 1-1/2 inch PVC DWV Saddle Tee is designed to connect smaller diameter branch lines into larger horizontal drain lines without disassembling existing piping.

Quantity
SKU: 6922 Categories: ,

4 Inch x 2 Inch or 1-1/2 Inch PVC DWV Saddle Tee – For Horizontal Drainage Connections

The 4 inch x 2 inch or 1-1/2 inch PVC DWV Saddle Tee is designed to connect smaller diameter branch lines into larger horizontal drain lines without disassembling existing piping. Commonly used in drain, waste, and vent (DWV) applications, this saddle tee enables field-configured tie-ins in both residential and light commercial systems.

Engineering and Performance Characteristics

This fitting is molded from durable, non-metallic PVC and is manufactured to meet applicable plumbing code requirements. It accommodates a secure, solvent-welded or clamped connection onto 4 inch mainlines and provides a reducing branch for either 2 inch or 1-1/2 inch piping, depending on field configuration.

  • ✅DWV Rated DesignBuilt for use in non-pressurized sanitary waste and vent systems.
  • ✅Compatible with Schedule 40 PVCIntended for use with standard wall thickness pipe in DWV applications.
  • ✅Corrosion-Resistant PVCOffers long-term resistance to chemical exposure, biological growth, and moisture degradation.

Specifications

  • MaterialPolyvinyl Chloride (PVC), white, non-pressure-rated
  • Main SizeFits 4 inch horizontal pipe
  • Branch SizeAccepts 2 inch or 1-1/2 inch DWV pipe (field cut or configured)
  • Connection TypeSaddle-style solvent weld or mechanical fastening depending on configuration
  • ComplianceConforms to ASTM D2665 and applicable IPC/UPC code sections for DWV systems

Field Applications

This saddle tee is typically installed in gravity-fed horizontal piping to add new branch lines without cutting and refitting pipe segments. It is suited for use in waste arm additions, retrofits, and auxiliary vent tie-ins. Mechanical or solvent weld installation should follow local code guidelines, including minimum branch offset spacing and slope considerations.

Code and Material Notes

PVC DWV fittings like this one are lightweight, low-maintenance, and approved for use in above-ground and limited underground drainage applications. All solvent-welded joints should be made with appropriate primer and cement per ASTM F656 and F493 standards.

The 4 inch x 2 inch or 1-1/2 inch PVC DWV Saddle Tee provides a cost-effective, time-saving solution for drain and vent system modifications, allowing contractors to maintain system flow integrity while making compliant connections in the field.

Specifications

Specifications Weight 1.070000 Brand Non-Specified Brand ADA Compliance No Length (inches) 10.7 Width (inches) 8.85 Height (inches) 4.1 Side A 4″ Side B 2″ or 1-1/2″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN PPK420 Material PVC DWV Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed saddle tee configuration and MPN before ordering.

Brand

Non-Specified Brand

MPN

PPK420

0
Scroll to Top