Skip to content
Need help identifying a part? Contact parts support
SKU: 6799Brand: Non-Specified Brand
,

4 inch x 2 inch PVC DWV Flush Bushing Fitting x Plastic

$2.54

4 Inch x 2 Inch PVC DWV Flush Bushing – Solvent Weld Reducing Fitting The 4 inch x 2 inch PVC DWV flush bushing is a solvent weld fitting designed to reduce pipe diameter within drain, waste, and vent systems.

Quantity
SKU: 6799 Categories: ,

4 Inch x 2 Inch PVC DWV Flush Bushing – Solvent Weld Reducing Fitting

The 4 inch x 2 inch PVC DWV flush bushing is a solvent weld fitting designed to reduce pipe diameter within drain, waste, and vent systems. Manufactured for compatibility with ASTM-compliant DWV piping, this fitting enables direct insertion into larger hubs or fittings while maintaining a clean, low-profile transition.

Material and Performance Characteristics

Constructed from rigid polyvinyl chloride (PVC), this flush bushing is suitable for non-pressurized gravity flow systems. It supports high dimensional stability and chemical resistance necessary for sanitary drainage systems

  • ✅Schedule 40 DWV RatedCompatible with standard DWV piping per ASTM D2665 or D1785 specifications.
  • ✅Solvent Weld ConnectionDesigned for installation using PVC primer and cement, ensuring permanent bonding at the joint.
  • ✅Flat-Face DesignAllows full insertion with minimal profile, ideal for vertical stack and offset transitions.

Installation Requirements

Ensure pipe and fitting surfaces are clean, dry, and square-cut. Apply approved primer and solvent cement per manufacturer instructions. Insert the bushing fully into the mating hub and allow for appropriate curing time before system testing. Follow all local code requirements and manufacturer-recommended curing schedules.

Application Scope

Flush bushings are commonly used in residential, multi-family, and commercial buildings for reducing larger-diameter DWV lines to smaller branches. Ideal for use in wall cavities, under-slab installations, and confined chase spaces where traditional reducing fittings may extend too far from the hub.

Code and Compliance Information

This fitting meets applicable plumbing codes requiring the use of lead-free, corrosion-resistant, non-metallic materials in DWV systems. It complies with standards for non-pressure sanitary drainage and is suitable for use in both horizontal and vertical configurations.

Technical Specifications

  • MaterialPVC (Polyvinyl Chloride)
  • Nominal Sizes4 inch x 2 inch
  • Connection TypeSpigot x Hub (Flush Bushing)
  • Standards ComplianceASTM D2665, D3311, CSA B181.2

The 4 inch x 2 inch PVC DWV Flush Bushing provides a compact and secure solution for reducing line sizes in solvent-weld DWV systems. Specify for installations where space constraints, code compliance, and long-term durability are key requirements.

Specifications

Specifications Weight 0.540000 Brand Non-Specified Brand ADA Compliance No Color White Length (inches) 1.75 Width (inches) 4.5 Height (inches) 4.5 End Style Fitting x Plastic Side A 4″ Side B 2″ Fitting Type Bushings Item Type Fittings Manufacturer Non Specified Manufacturer MPN 5910 Material PVC DWV Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

5910

0
Scroll to Top