Skip to content
Need help identifying a part? Contact parts support
SKU: 6897Brand: Non-Specified Brand
,

4 inch x 4 inch x 3 inch x 3 inch PVC DWV Double Reducing Sanitary Tee Plastic x Plastic x Plastic

$8.08

4 inch x 3 inch PVC DWV Double Tee – Solvent Weld Fitting for Horizontal Drainage Applications The 4 inch x 3 inch PVC Double Tee is a drainage, waste, and vent (DWV) system fitting designed to connect three drain branches to a common horizontal line.

Quantity
SKU: 6897 Categories: ,

4 inch x 3 inch PVC DWV Double Tee – Solvent Weld Fitting for Horizontal Drainage Applications

The 4 inch x 3 inch PVC Double Tee is a drainage, waste, and vent (DWV) system fitting designed to connect three drain branches to a common horizontal line. With solvent weld socket connections on all inlets and outlets, this fitting provides reliable flow management and venting in non-pressurized plumbing systems. The double tee configuration supports multi-directional flow in compliance with standard DWV layout requirements.

Manufactured from rigid polyvinyl chloride (PVC), this fitting is suitable for use in gravity-flow drainage systems in residential, commercial, and institutional buildings. It conforms to ASTM D2665 specifications for PVC plastic drainage systems and is listed under applicable plumbing code approvals for DWV components.

Technical Specifications

  • MaterialPVC Type I, cell classification 12454 per ASTM D1784
  • ConfigurationDouble sanitary tee – solvent weld hub x hub x hub x hub
  • Size4 inch main run x 3 inch branch
  • Standard ComplianceASTM D2665, NSF-listed for DWV applications
  • Temperature RangeUp to 140°F intermittent service

Key Features

  • ✅Code-Compliant DesignMeets IPC/UPC standards for use in horizontal drainage and vent systems
  • ✅Corrosion-Resistant PVC ConstructionSuitable for use in indoor or concealed wall applications without degradation
  • ✅Solvent Weld JointsSocket ends are compatible with standard PVC primer and cement bonding methods
  • ✅Lightweight MaterialEasy to handle and install on-site without special tools

Installation Guidelines

All joint surfaces should be clean and dry prior to solvent welding. Use ASTM F656 primer and ASTM D2564 PVC solvent cement for proper bonding. Ensure full insertion into socket depths and allow adequate cure time prior to system testing. Install per manufacturer guidelines and applicable plumbing code for DWV orientation and branch layout.

Common Applications

This 4 inch x 3 inch PVC DWV double tee is typically used in

  • Horizontal drain piping for bathrooms and group fixtures
  • Branch line intersections requiring symmetrical tee connections
  • Vent connections within DWV stacks
  • Wall cavity and utility chases in multi-unit or slab-on-grade construction

Code and Safety Note

DWV fittings are not designed for pressurized systems. They are specifically intended for use in sanitary waste and vent applications where gravity flow is maintained. Proper sizing, slope, and orientation per code are required to ensure system performance and to prevent air admittance or siphonage failures.

The 4 inch x 3 inch PVC Double Tee DWV provides a compliant and durable solution for complex drainage configurations. Its solvent weld design, dimensional accuracy, and corrosion-resistant construction make it a standard component in code-approved DWV installations.

Specifications

Specifications Weight 2.270000 Brand Non-Specified Brand ADA Compliance No Color White Length (inches) 5 Width (inches) 10.25 Height (inches) 8.25 End Style Plastic x Plastic x Plastic x Plastic Side A 4″ Side B 4″ Side C 3″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN 5821 Material PVC DWV Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

5821

0
Scroll to Top