Skip to content
Need help identifying a part? Contact parts support
SKU: 2010968Brand: Lukjan
,

4″ x 4″ Smoke Pipe Tee, 26GA

$4.26

Lukjan Duct Tee, 90° — Series 6, 4″, Crimped Connection, 9-1/4″ L × 4″ W A 90-degree crimped duct tee from Lukjan’s Series 6 line, designed to branch airflow from a main 4-inch duct into a perpendicular 4-inch branch. The crimped connection facilitates easy insertion into mating d…

Quantity
SKU: 2010968 Categories: ,

Lukjan Duct Tee, 90° — Series 6, 4″, Crimped Connection, 9-1/4″ L × 4″ W

A 90-degree crimped duct tee from Lukjan’s Series 6 line, designed to branch airflow from a main 4-inch duct into a perpendicular 4-inch branch. The crimped connection facilitates easy insertion into mating ductwork.

  • Series / modelSeries 6(Lukjan duct / fitting line):contentReference[oaicite:1]{index=1}
  • Part / model numberRX7004(4″ × 4″ smoke pipe tee, 26 ga):contentReference[oaicite:2]{index=2}
  • Configuration: 90° duct tee, branching at right angle
  • Main diameter4 inch(for both run and branch):contentReference[oaicite:3]{index=3}
  • Connection style: Crimped ends (for insertion into duct sockets):contentReference[oaicite:4]{index=4}
  • Length (main run)9-1/4 inches (9.25″)contentReference[oaicite:5]{index=5}
  • Width / branch size4 inches(same as main duct):contentReference[oaicite:6]{index=6}
  • Material: Galvanized steel (standard for HVAC sheet metal fittings):contentReference[oaicite:7]{index=7}
  • Finish: Galvanized coating / zinc finish for corrosion resistance (typical for Lukjan ductwork):contentReference[oaicite:8]{index=8}
  • Gauge / thickness: 26 gauge (for the 4″ smoke pipe tee listing):contentReference[oaicite:9]{index=9}
  • Weight: 0.70 lb (as per the product listing):contentReference[oaicite:10]{index=10}
  • Mounting / installation
    • Insert the crimped ends into the mating duct/tee sockets and secure with sheet-metal screws, rivets, or straps
    • Seal all seams and joints with foil duct tape or mastic to prevent leakage
    • Ensure proper alignment of run and branch ducts to minimize turbulence and stress on joints
  • Applications
    • Used in HVAC systems (particularly smoke pipe / furnace ductwork) to split airflow between two 4-inch ducts
    • Typical in residential or light commercial installations where a side branch is needed off a 4″ main run
  • Performance & design notes
    • Because this is a sharp 90° branch, expect some pressure drop / flow loss relative to straight duct; system design should account for this
    • The crimped connection allows easier field fit, but care must be taken to ensure a tight, secure joint
    • Galvanized steel construction provides durability and compatibility with standard duct systems

Specifications

Specifications Weight 0.700000 Length (inches) 15 Width (inches) 12 Height (inches) 4 Item Type HVAC Duct Brand Lukjan Manufacturer Lukjan Metal Products MPN RX7004 Sub Type Flared Vent Tee Material Steel Item Returns This item can be returned
Brand

Lukjan

MPN

RX7004

0
Scroll to Top