Details
Model5M5
ManufacturerMetal-Fab, Inc.
Product NameType B Gas Vent Pipe – Series M
Part Number1842049
DescriptionDouble-wall Type B vent pipe, 5-inch diameter, 5-foot length, aluminum inner liner, galvanized steel outer wall, UL-listed for Category I gas appliances.
Product Overview
The Metal-Fab 5M5 Type B Gas Vent Pipe is a UL-listed, double-wall venting component designed for use with Category I natural draft gas-fired appliances, including furnaces, boilers, and water heaters. The vent features an aluminum inner flue and a galvanized steel outer casing, providing corrosion resistance and thermal performance while maintaining reduced clearance to combustible materials. The 5-inch diameter, 5-foot section is part of Metal-Fab’s M-Series system, engineered for secure joint locking and simplified alignment in residential, light commercial, and multifamily venting applications. The precision-rolled end design allows for fast, safe installation without field fabrication.
Technical Specifications
- Manufacturer Part Number5M5
- Alternate Part Number1842049
- SeriesM-Series Type B Gas Vent
- Vent TypeType B Double-Wall Gas Vent
- Inner MaterialAluminum alloy (corrosion-resistant)
- Outer MaterialGalvanized steel
- Nominal Diameter5 inches (127 mm)
- Length60 inches (5 feet / 1.52 meters)
- Wall ConstructionDouble-wall, air-insulated design
- Wall Thickness1/4 inch nominal
- Connection TypeTwist-lock joint with positive stop
- Clearance to Combustibles1 inch (per UL 441 listing)
- Maximum Operating Temperature480°F (249°C)
- Appliance CategoryCategory I (natural draft, non-positive pressure)
- ApplicationGas-fired furnaces, boilers, unit heaters, and water heaters
- Installation OrientationVertical or offset as permitted by code
- ComplianceUL 441, NFPA 54 (National Fuel Gas Code), ICC Standard Fuel Gas Code
- FinishMill aluminum (inner), galvanized steel (outer)
- WeightApprox. 2.8 lb per linear foot (varies by diameter)
- Use EnvironmentIndoor venting applications where combustion gas temperatures remain below condensation threshold
Installation Notes
- Verify appliance category and vent sizing per NFPA 54 and manufacturer’s tables before installation.
- Align and engage the twist-lock connections fully to ensure positive mechanical locking between sections.
- Maintain minimum 1-inch clearance from combustibles along the entire vent run.
- Support vertical runs at intervals per code using approved wall straps or joist hangers.
- Terminate with a UL-listed Type B vent cap; ensure proper draft hood connection at appliance outlet.
- Do not mix venting components from different manufacturers within a single system.
Summary
The Metal-Fab 5M5 Type B Gas Vent Pipe is a 5-inch diameter, 5-foot-long double-wall vent section designed for Category I gas appliance venting. Featuring aluminum inner and galvanized steel outer construction, it provides reduced clearance to combustibles, efficient draft performance, and quick twist-lock assembly. This component meets UL 441 and NFPA 54 standards for professional installation in residential and light commercial systems.




