Por-Rok Waterproofing Aqua Plug – Rapid-Set Hydraulic Cement for Active Leaks
ThePor-Rok Aqua Plugis a hydraulic, quick-setting repair compound designed to stop active water leaks through concrete and masonry surfaces. Engineered for jobs where water infiltration is under pressure, this material sets rapidly, expands as it cures, and develops a durable bond that seals against hydrostatic pressure.
Why Professionals Use Aqua Plug
Por-Rok’s Aqua Plug is trusted on job sites for emergency and permanent repairs. Its single-component, non-metallic formulation mixes easily with water, applies directly to the affected area, and begins setting immediately. Once cured, it resists freeze-thaw cycles and provides a long-term waterproofing barrier.
Key Performance Benefits
- Rapid SettingBegins to harden in minutes, stopping leaks on contact.
- Hydrostatic ResistanceFormulated to hold against water pressure infiltration.
- Expansive PropertiesExpands slightly while curing to ensure a tight seal.
- Non-CorrosiveChloride-free, non-metallic blend prevents rust and deterioration.
- Freeze-Thaw StableReliable for below-grade and exterior applications in varying climates.
Technical Data
- FormHydraulic cement repair mortar
- Weight50 lb bag
- Specific Gravity2.6–2.7
- Set TimeInstant to a few minutes depending on temperature
- ApplicationSealing water seepage through concrete, block, and masonry
Installation Guidelines
For best results, surface preparation is critical. Remove loose material, open cracks to a V-notch where possible, and clean the substrate of dirt and debris. Mix Aqua Plug with clean water into a putty-like consistency. Apply by hand or trowel, pressing firmly into the leaking area until initial set occurs. Due to the product’s rapid cure, mixing should be done in small batches that can be placed immediately.
Usage Notes for Contractors
Professional InstallersAqua Plug is suited for emergency patching in basements, foundations, tunnels, tanks, and similar concrete structures. Its fast reaction time allows crews to contain active leaks quickly, restoring site integrity and preventing costly water damage.
Maintenance ApplicationsCommonly used in industrial, municipal, and residential waterproofing work where hydrostatic conditions demand a fast, durable solution.
Distinct Features
- Non-Metallic, Non-RustingMaintains structural integrity over time.
- Chloride-FreeSafe for reinforced concrete applications.
- Workable PropertiesCan be shaped and pressed into irregular voids.
- Expansive SealEnsures watertight closure during hydration and curing.
Summary
ThePor-Rok Aqua Plugis a professional-grade waterproofing material formulated to stop active water leaks under pressure. Its rapid-setting, expansive properties and durable composition make it a dependable choice for contractors working in demanding environments where reliability is critical.




