Skip to content
Need help identifying a part? Contact parts support
SKU: 7025Brand: Non-Specified Brand
,

6 inch PVC Sewer and Drain 90 Degree Short Turn Elbow Hub x Hub

$8.41

6 Inch PVC Sewer and Drain 90° Short Turn Elbow – Hub x Hub The 6 inch PVC 90-degree short turn elbow is engineered for use in non-pressurized gravity flow sewer and storm drainage systems. Featuring solvent-weld hub connections on both ends, this fitting is designed to change the…

Quantity
SKU: 7025 Categories: ,

6 Inch PVC Sewer and Drain 90° Short Turn Elbow – Hub x Hub

The 6 inch PVC 90-degree short turn elbow is engineered for use in non-pressurized gravity flow sewer and storm drainage systems. Featuring solvent-weld hub connections on both ends, this fitting is designed to change the direction of flow in horizontal or vertical piping layouts with a tighter radius than standard long sweep fittings.

Material and Compliance Details

  • ✅MaterialPVC (polyvinyl chloride) conforming to ASTM D3034 and D1784, Cell Classification 12454-B
  • ✅Connection TypeHub x Hub (solvent weld) designed for use with SDR 35 sewer and drain pipe
  • ✅Angle90 degrees – short turn for compact directional changes within code-approved applications
  • ✅System UseNon-pressure, gravity-flow sewer and storm drainage systems
  • ✅CertificationsMeets ASTM D3034, complies with applicable sections of the IPC and UPC

Installation Guidelines

This fitting should be installed using appropriate primer and solvent cement per ASTM D2855 for PVC solvent weld systems. Ensure that the pipe is fully inserted into the hub socket and held until initial set is achieved. Proper surface preparation and clean, dry fit-up are essential to ensure long-term sealing integrity. Not intended for use in pressurized systems or potable water distribution.

Application Scenarios

Used in sanitary sewer laterals, building drainage systems, stormwater management, and underground site utilities. The short turn radius allows for directional transitions in confined areas such as mechanical vaults, manholes, and utility chases where long sweep fittings may not be feasible.

Product Highlights

  • ✅Compact Radius– Shorter turning radius than a long sweep for installations with dimensional constraints
  • ✅High Flow Efficiency– Designed to maintain adequate flow velocity while complying with slope and layout requirements
  • ✅Corrosion Resistant– Will not rust or scale; compatible with standard SDR 35 pipe systems
  • ✅Solvent Weld Compatibility– Joins directly to other SDR 35 fittings and pipe using industry-standard solvent cement

Technical Summary

  • Nominal Size6 inch
  • Fitting Type90° Short Turn Elbow
  • End ConnectionsHub x Hub
  • Intended UseNon-pressure sewer and storm drainage
  • Code ComplianceASTM D3034 / D1784; UPC / IPC listed

The 6 Inch PVC 90° Short Turn Elbow (Hub x Hub) is a reliable, code-compliant solution for gravity-flow drainage systems requiring directional changes in confined layouts. Manufactured to ASTM standards, it ensures consistent fit, joint strength, and flow performance in site utilities and underground drainage applications.

Specifications

Specifications Weight 2.130000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Color White Length (inches) 6.75 Width (inches) 9.5 Height (inches) 9.5 End Style Hub x Hub Side A 6″ Side B 6″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN P206 Material PVC S&D Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed elbow configuration and MPN before ordering.

Brand

Non-Specified Brand

MPN

P206

0
Scroll to Top