Lukjan Straight Perimeter Register Boot — Series P5, Ø 6″, 10″ Length, 6″ Width
Straight perimeter register boot designed to transition airflow from a 6-inch round duct to a narrow rectangular (perimeter) opening behind a grille. The Series P5 boot distributes air along the edge line rather than as a point discharge.
- Series / ModelP5(Lukjan Straight Perimeter Register Boot):contentReference[oaicite:1]{index=1}
- Manufacturer / Part NumberRB206106for the 6″ × 10″ × 6″ variant (US Supply listing):contentReference[oaicite:2]{index=2}
- Inlet (duct) diameter6 inches (round)contentReference[oaicite:3]{index=3}
- Overall length (depth)10 inchescontentReference[oaicite:4]{index=4}
- Face / slit width (rectangular opening width)6 inchescontentReference[oaicite:5]{index=5}
- Material: Steel (galvanized):contentReference[oaicite:6]{index=6}
- Finish: Hot-dip galvanized (for corrosion protection):contentReference[oaicite:7]{index=7}
- Material thickness / gauge30 gaugecontentReference[oaicite:8]{index=8}
- Weight (approx): 0.50 lb:contentReference[oaicite:9]{index=9}
- End direction: Straight (i.e. the face opening is aligned directly with the duct axis):contentReference[oaicite:10]{index=10}
- Design features
- Stamp-lock construction (for improved airtightness at seams):contentReference[oaicite:11]{index=11}
- Hemmed collars / edges to reduce sharp edges and strengthen the sheet metal:contentReference[oaicite:12]{index=12}
- Die-punched parts for consistent dimension and fit:contentReference[oaicite:13]{index=13}
- Installation / mounting
- Insert the 6″ round inlet into the matching duct or fitting; secure with screws, rivets, or sheet-metal fasteners.
- Mount the perimeter grille / register face over the rectangular slit so airflow is distributed along the edge.
- Seal all seams, joints, and the collar interface using foil duct tape or HVAC mastic to minimize air leakage.
- Support the boot adequately so it remains aligned and does not sag under load over time.
- Performance & design considerations
- The 6″ slit width along a 10″ length aims to provide linear (perimeter) airflow instead of point discharge — helps with more uniform air distribution along walls or floors.
- Because the slit is 6″ wide, ensure the grille or register opening is compatible and has sufficient free area to minimize resistance.
- Galvanized 30 ga steel offers a balance of lightness and structural integrity for standard HVAC indoor applications.
- Stamp-lock and hemmed edges help reduce leakage and rough edges, improving system efficiency and safety.
Specifications
Buying Information
Verify dimensions and connection details against the listed specifications before ordering.




