Camco 10862 – Side Mount T&P Relief Valve Discharge Tube, 60-Inch Thermoplastic
Thermal Expansion Discharge Tube for Water Heater T&P Relief Valves
The Camco 10862 Side Mount Runoff Tube is a straight 60-inch thermoplastic polypropylene discharge line designed for horizontal or side-mounted temperature and pressure (T&P) relief valves on residential and light commercial water heaters. This component is critical for code-compliant safe discharge of water and steam during overpressure or overtemperature events.
Constructed from rigid, non-metallic material, the tube resists corrosion, scale buildup, and heat deformation under standard relief conditions. The tube can be field-cut to length and installed using standard fittings or clamps as required by system layout and local plumbing code.
Product Details
- Part Number10862
- Length60 inches (nominal)
- MaterialThermoplastic polypropylene, corrosion-resistant
- ApplicationSide outlet T&P relief valves on water heaters
- IncludesNo. 06912 gasket for sealing to valve outlet
- Made inUSA
Application and Compliance
This tube meets typical code requirements for discharge from T&P valves, which mandate a full-size run to a floor drain or suitable termination point with appropriate slope and no reduction in diameter. Thermoplastic material is suitable for discharges up to 210°F and must not be used in systems with potential for continuous high-temperature discharge or steam venting.
Ensure compatibility with the water heater model and local code enforcement agency prior to installation. Intended for use in pressure relief drainage applications only; not rated for pressurized supply lines.
Installation Notes
- Tube can be trimmed to match installation clearances
- Cut ends should be deburred for clean fit to fittings or gaskets
- Use with side-mounted valves having 3/4” NPT female outlet (verify gasket fit)
- Fasten securely to prevent movement during discharge events
Key Features for Professional Use
- Rigid Thermoplastic BodyMaintains structure under intermittent high-temperature discharge
- Cut-to-Length CapabilityEasily trimmed to fit space constraints in retrofit or new installations
- Tool-Friendly SurfaceAllows for grip with standard pliers or pipe wrenches during fitting
- Non-Corrosive MaterialIdeal for hard water or corrosive environments
Specifications
Buying Information
Confirm 10862 and the listed specifications match the existing component before ordering.




