Skip to content
Need help identifying a part? Contact parts support
SKU: 2010779Brand: Lukjan
,

7″ 90 Degree Oval Elbow Duct Fitting, Vertical

$1.60

Lukjan Oval Vertical Elbow — Series 6033, 7″, 90° (6-7/8″ L × 9-1/2″ W) A vertical oval duct elbow used in HVAC systems to turn airflow direction by 90°, while maintaining an oval cross-section. The Series 6033 model with a 7″ nominal size transitions the duct path vertically (up/…

Quantity
SKU: 2010779 Categories: ,

Lukjan Oval Vertical Elbow — Series 6033, 7″, 90° (6-7/8″ L × 9-1/2″ W)

A vertical oval duct elbow used in HVAC systems to turn airflow direction by 90°, while maintaining an oval cross-section. The Series 6033 model with a 7″ nominal size transitions the duct path vertically (up/down) while retaining the oval profile.

  • Series / model6033(Lukjan oval vertical elbows) — also marketed under Snappy 6033-7 variant:contentReference[oaicite:0]{index=0}
  • Nominal size7 inch(refers to the nominal diameter / “size” class of the oval):contentReference[oaicite:1]{index=1}
  • Angle90° (right angle elbow)contentReference[oaicite:2]{index=2}
  • Length (throat / depth)6-7/8 inchescontentReference[oaicite:3]{index=3}
  • Width (major dimension / across the oval opening)9-1/2 inchescontentReference[oaicite:4]{index=4}
  • Material: Steel (hot-dip galvanized or G30 / G-series coating):contentReference[oaicite:5]{index=5}
  • Gauge / Thickness: Typically 30 gauge steel for sheet metal HVAC fittings (common in oval duct fittings):contentReference[oaicite:6]{index=6}
  • Finish: Galvanized (for corrosion protection):contentReference[oaicite:7]{index=7}
  • Weight (approx): 0.50 lb:contentReference[oaicite:8]{index=8}
  • Part / MPNOX5407(for the 7″ vertical oval elbow):contentReference[oaicite:9]{index=9}
  • Applications
    • Used in HVAC duct systems to route air in vertical direction changes while maintaining oval duct cross-sections (e.g. up or down changes in layout).
    • Compatible with oval duct and fittings of the same series / size for seamless transitions and minimal turbulence.
  • Installation notes
    • Use proper joining methods (sheet-metal screws, rivets, or cleats) and seal all seams (foil tape, mastic) to minimize leakage.
    • Align the elbow properly to avoid internal turbulence or kinks in the airflow path.
    • Check that the adjacent ductwork dimensions match the oval profile for smooth transitions.

Technical & Performance Notes

  • The oval shape helps reduce height or width constraints compared to round elbows while preserving cross-sectional area for airflow.
  • Because the width (9-1/2″) is relatively large compared to the nominal 7″, velocity variation may occur—proper sizing and system balancing is advised.
  • The relatively short depth (6-7/8″) keeps the elbow compact, reducing the space requirement for routing changes.
  • Galvanized steel construction provides durability in typical indoor HVAC environments; periodic inspection is recommended in humid or aggressive settings.
  • When installed properly in a system with matching oval ductwork, airflow losses should be modest; however, care should be taken to avoid sharp bends before or after the elbow to reduce pressure drop.

Specifications

Specifications Weight 0.500000 Length (inches) 10 Width (inches) 9 Height (inches) 6 Item Type HVAC Duct Brand Lukjan Manufacturer Lukjan Metal Products MPN OX5407 Sub Type Crimped Wire Wheel Angle 90 Deg Material Carbon Steel Shape Oval Application I.D. Cleaning, Deburring, Rust, Scale, Carbon, and Corrosion Removal Item Returns This item can be returned

Buying Information

Match the listed OX5407 and configuration to the existing component before ordering.

Brand

Lukjan

MPN

OX5407

0
Scroll to Top