Skip to content
Need help identifying a part? Contact parts support
SKU: 119479Brand: MusteeAvailability: Out of Stock
,

72″ Shower Wall System, White

$99.48

Mustee 260 DURAWALL® Five-Panel Thermoplastic Shower Wall System The Mustee 260 is a five-piece shower wall system fabricated from high-impact, molded thermoplastic. Engineered for 30″ x 60″ alcove shower and tub installations, this wall set is suitable for both new construction a…

Out of stock

SKU: 119479 Categories: ,

Mustee 260 DURAWALL® Five-Panel Thermoplastic Shower Wall System

The Mustee 260 is a five-piece shower wall system fabricated from high-impact, molded thermoplastic. Engineered for 30″ x 60″ alcove shower and tub installations, this wall set is suitable for both new construction and remodeling applications. It is designed to adhere directly to wall substrates using construction-grade adhesive or mechanical fasteners, offering a practical solution where tile or solid-surface systems are not required.

Product Features

  • MaterialCo-extruded thermoplastic construction resists impact, abrasion, and typical bathroom moisture exposure.
  • Five-Piece ConfigurationIncludes back panel, two corner panels, and two end panels for three-wall alcove installation.
  • Six Integral Storage RecessesMolded-in shelf features located in corner panels provide built-in storage with no additional framing required.
  • Overlapping Panel DesignIntegrated flanges and overlap joints reduce the need for exposed caulking while helping prevent water intrusion.
  • Trim-to-Fit CapabilitySide panels can be cut to fit non-standard or out-of-square alcove conditions.

Technical Specifications

  • Wall Height71-1/2″
  • Nominal Alcove Fit30″ D x 60″ W (compatible with Mustee 3060 ShowerTub™ and standard-size tubs)
  • Panel Count5
  • FinishGloss-textured surface with color-matched finish (White or Bone)
  • Installation MethodDirect-to-wall adhesive or mechanical fasteners (not included)
  • Domestic/ImportManufactured in USA

Installation Guidance

This wall system is intended for installation over water-resistant wallboard or properly prepared drywall. Panels may be trimmed using standard cutting tools. Fastening flanges are concealed behind each overlapping edge for a finished appearance. A dry-fit test is recommended before applying adhesive to verify proper alignment. Professional installation is advised for best water containment and code compliance in residential applications.

Notes for Contractors

  • Compatible BasesUse with Mustee’s 3060 ShowerTub™, similar-size receptor bases, or cast iron/enamel tubs with standard apron height.
  • Wall Surface PrepSubstrate must be flat, dry, and free of debris prior to adhesive bonding.
  • Field AdjustabilityPanel design allows on-site trimming to accommodate walls that are not square or plumb.

Specifications

Specifications Weight 40.000000 Length (inches) 35.5 Width (inches) 6 Height (inches) 71-1/2 Item Type Tub and Shower Fixtures Brand Mustee Drain Location Center Manufacturer E.L. Mustee & Sons MPN 260WHT Sub Type Shower Wall Material Thermoplastic Mounting Type Wall Shape Square/Rectangular Item Returns This item can be returned

Buying Information

Confirm the listed shower wall system configuration and identification before ordering.

Brand

Mustee

MPN

260WHT

0
Scroll to Top