Cover Guard CGINLT Wall Inlet (Line Set Wall Inlet Cover)
The CGINLT is the Cover Guard line set wall inlet piece, designed to enclose and protect HVAC refrigerant/condensate/signal lines as they enter a wall. It acts as a finished end-piece to maintain aesthetics and shield the line set termination point from weather, pests, and damage.
- Model / PartCGINLT(Cover Guard Wall Inlet):contentReference[oaicite:0]{index=0}
- Application: End piece cover for line sets entering a wall — the transition point where piping, wiring, or conduits pass through the wall surface.:contentReference[oaicite:1]{index=1}
- Compatible system: Use with Cover Guard adjustable line set cover systems, especially when a line set terminates flush against or into a wall.:contentReference[oaicite:2]{index=2}
- Material: Rigid UV-stable plastic (PVC or similar polymer):contentReference[oaicite:3]{index=3}
- Finish / Color: White (paintable per instructions):contentReference[oaicite:4]{index=4}
- Temperature rating / operating conditions
- Tested from approximately **–4 °F to 140 °F**:contentReference[oaicite:5]{index=5}
- UV resistant construction for outdoor exposure:contentReference[oaicite:6]{index=6}
- Weather resistant / tested (e.g. >2,000 hours exposure in standard tests) per manufacturer data:contentReference[oaicite:7]{index=7}
- Dimensions (nominal)
- Length: ~ 9.44 in ≈ 9 7⁄16 in:contentReference[oaicite:8]{index=8}
- Width: ~ 5.66 in:contentReference[oaicite:9]{index=9}
- Height / Channel (adjustable): ~ 3.7 in to 4.75 in (height of the internal channel):contentReference[oaicite:10]{index=10}
- Other noted dimensions
- Wall inlet outer height: ~ 9.25 in:contentReference[oaicite:11]{index=11}
- Wall inlet outer width: ~ 2.75 in:contentReference[oaicite:12]{index=12}
- Depth (projection from wall): ~ 5.75 in:contentReference[oaicite:13]{index=13}
- Adjustable / flexible features
- Channel depth is adjustable (to accommodate variations in wall thickness or line set spacing):contentReference[oaicite:14]{index=14}
- Cam screw fasteners (quick-lock style) allow opening / closing of the fitting for servicing or repositioning of linesets:contentReference[oaicite:15]{index=15}
- Peel-away protective film helps maintain clean finish during installation:contentReference[oaicite:16]{index=16}
- Components are paintable (with appropriate surface prep) to match building aesthetics:contentReference[oaicite:17]{index=17}
- Performance / functional features
- Encloses and protects line sets (refrigerant pipes, condensate lines, wiring) where they pass into a wall, reducing exposure to elements, pests, and physical damage:contentReference[oaicite:18]{index=18}
- Helps maintain a finished, clean look to exterior walls with line set penetrations:contentReference[oaicite:19]{index=19}
- Fittings do **not** release under pressure (i.e. robust closure / interlock to avoid accidental separation):contentReference[oaicite:20]{index=20}
- Installation / mounting notes
- Mount flush to the wall surface at the point where the lineset enters the wall:contentReference[oaicite:21]{index=21}
- Use appropriate sealant (e.g. caulk or weatherproof gasket) behind the inlet to prevent water ingress around the line penetration (best practice) — manufacturer instructions may recommend it:contentReference[oaicite:22]{index=22}
- Ensure internal lines are centered and do not pinch or rub against internal surfaces when closing cam screws:contentReference[oaicite:23]{index=23}
- Paint the exterior surface (if desired) after installation, observing recommended paint and curing instructions to avoid impairing fit / tolerances:contentReference[oaicite:24]{index=24}
- If used in soffit or upward-entry installations, alternate Cover Guard models (e.g. CGSTI) may be better suited; the CGINLT is optimized for standard wall entry configuration:contentReference[oaicite:25]{index=25}
- Warranty / compliance
- Often backed by a minimum 3-year limited warranty (manufacturer standard for RectorSeal / Cover Guard line):contentReference[oaicite:26]{index=26}
- Complies with UV-exposure / thermal cycling test standards used in HVAC plastic covers (per manufacturer statements):contentReference[oaicite:27]{index=27}
Specifications
Buying Information
Confirm the listed RectorSeal identifier, size, and configuration match your application before ordering.




