Rheem SP20233 – LP Gas Control Thermostat for Residential Water Heaters
The Rheem SP20233 is a liquid propane gas control thermostat specifically designed for use in compatible Rheem residential water heaters. It regulates burner function by controlling gas flow based on the set water temperature, ensuring safe and consistent operation. The unit includes integrated safety controls to prevent overheating and manage system shutoff when necessary.
Application Overview
This control is used as a replacement part for LP-fueled water heaters where precise temperature regulation and system safety are required. It is a direct OEM component designed for tank-style residential units and must be matched with the appropriate Rheem model to ensure correct operation.
Product Specifications
- Part NumberSP20233
- Fuel TypeLiquid Propane (LP)
- Voltage120V
- Gas Inlet Connection1/2″ NPT
- Inlet PressureRated for 10″ WC LP gas
- Temperature AdjustmentFront-facing dial for manual setpoint selection
Installation Notes
The SP20233 is designed for direct-mount installation to the water heater tank. Installation should be completed by a licensed plumber or qualified HVAC technician. All gas connections must be leak-tested, and the water heater must be checked for proper ignition and flame characteristics after installation. This model is not convertible for use with natural gas.
Installation Requirements
- MountingDirect thread-in connection to the control port on compatible Rheem models
- Tools RequiredPipe wrench, thread sealant, leak detection solution
- TestingVerify burner operation, temperature control, and safety shutoff
Key Functional Features
- Mechanical ThermostatManual temperature adjustment with integrated gas valve
- Integrated SafetyIncludes high-temperature limit control and shutoff mechanism
- Service UseOEM replacement part for Rheem propane units
- System ProtectionDesigned to maintain stable water temperatures and prevent unsafe operating conditions
Contractor Considerations
The SP20233 is a purpose-built component intended for use with specific Rheem water heater models that operate on LP gas. It should not be substituted across other systems without verifying model compatibility and input requirements. When replacing this component, ensure the water heater is powered down and that gas flow is shut off and purged prior to removal and installation.
Specifications
Buying Information
Confirm the SP20233 and the listed application before ordering.




